Search:

Hi All,

Nearly 2 weeks ago, some one broke into my red 90model CRX (australian delivered) and stole the 2 stock seats (drivers side has been stitched on the RHS), the RHS interior door trim (...

Thanks for the advice whiteballade.
I had figured it was a clip system, but i dont believe prying it up will pop it out, as the release clips appear to be on the side of facing towards the roof.
I...

Ok.
My main problem is how to access this strip on my other CRX as it seems to be sealed to the window and im unsure how to unclip it with no visible access points.
Thanks for the speedy reply to...

Hi all,

Im just looking for a bit of help from anyone who may have fully removed a CRX boot lid.
My problem is that the top plastic sealing strip at the top of the back window (see pictures) has...

Hi all,

I have a quick question, any help would be appreciated.
I had a late model 89 CRX that i wrote off, i have now purchased an 88 CRX.
Are most things compatible from the 89 version to the...

Hey guys,

Just a quick question on the D16a8, would like to know the stock power rating.
Or if anyone has had one dynoed, would like to compare dyno reports.
Any info would be appreciated.
...

aimre: thats the factory standard, approx 110 dB. those figures would probably be produced in an anacohic chamber, or somewhere very silent.

aznpsuanz: sorry, i did not mean it to sound that way,...

I understand AZNPSUAZN as i just completed a diploma in Audio Engineering.
Didnt you forget to state that, its CYCLES PER SEC. an that sound travels at 343.6 meters a second, at 1 Atmospheric...

ah yes, should do the job.

not really, 500hz is down towards the less noticable side.
as humans we are born with a hearing range from 20hz to 20kHz.
20hz being the very low bassy an unapparent to our hearing, as up towards...

Hi, if your talking about frequency? you mean kHz.
An i would suggest it would probably be around 2 to 3 kHz, as that is a very prominent area for hearing.

were you talking about frequency?

Thanks guys

much appreciated.

the dash is square on top.

well, thats a good question, i will try an find the Hot 4's magazing it was in, an i will get back to you.

Thanks for your help.

Sort of like this, but only covering the light section "not connected to the body kit.http://images.carsales.com.au/private/1250718.jpg

In a way like those, same design, but its just a cover in the are where there are not the round lights, sort of like that orange CRX pic, if you can picture that the black section was orange (same...

By the way, it has 170,000 Kms on the clock with stock internals.

ok, i will try to find a pic.

They cover up the lights ( same colour as car ) an leave a few circles, sort of like R32 or 33 Skyline lights.

Hi, im looking at getting a turbo kit for my crx, i was wondering if anyone could advise me on prices, and possibly other parts i will need.

Current mods already (not many): Greddy Emanage comp....

Does anyone know where you can purchase plastic or vinyl taillight covers for 88-91 crx?
Or would i have to get them specially made?
I have seen them in a magazine on a crx once or twice.

Thanks...

ok, thanks.

Also would you know at all, my rear bumper hangs out on either side by 1 to 2 mm, would this be because someone has put a 90-91 bumper on there?

thanks, it does not say under the bonnet on the plate, i just checked.
The indicators do how ever have two screws holding them in place.
Does it being Australian Delivered make any difference??

Hi everyone,

I was just wondering if anyone could tell me the easiest way to figure out what year model my CRX is.
Its registered as a 1990 model, but i have my doubts.

Can anyone help...

Hi, i would agree with the solder points on your ECU, i had the exact same problem awhile ago, fuel scenario and all. Turned out there was alot of solder points had broken.

It was expensive for...

thanks mate.

ill give it a try