Could someone please confirm the torque settings for the 16 gearbox/transmission bolts , I have researched and it varies form 20ftpound to 33footpound ??
I purchased the attached kit 3 years ago and installed it in a B16A cable box, has been fine with only very slight judder on occasions, the gearbox requires a rebuild that's the reason why...
yes I think that is the way to go, remove the head and see whats what
budget might be the incorrect word, basically want to spend least amount $$$ possible but still have a quality job, happy to...
yep I agree, by the way is anyone on the same page as me regarding the above? I am assuming its worth purchasing a OEM head gasket, with the head off I guess valve stem seals are worth doing? I am on...
traces of water in the rocker cover and a milky substance under the oil cap, going through coolant and it seems to be running a few degrees warmer than normal, from my understanding that sums up a...
ok looks like the head gasket is on its way out, i have reinstated a thread elsewhere regarding engine builders in melbourne, if the head is coming off may aswell have it inspected and look into...
out of interest why does (why would ) you want the 'blow off' / oil return back into the intake manifold and combine with the fuel/air- so it can burn away??
yea oil was on the thread and tip of plug as in the electrode
going to grab a new cam cover gasket and o rings seals then a compression test is a good idea
I have had starting issues suddenly appear, the b16a starts but runs very rough and only if i blip the throttle, it will not idle, it stalls as soon as I have no throttle.
Ok that is true but I am not sure why it would be different to the original clutch setup I have. The tranny had a standard honda flywheel , pressure plate and clutch plate and the current pedal pivot...
I have installed a brand new HD exedy clutch plate, pressure plate and lightened flywheel in my Y1 cable box, have driven car briefly, selects all gears, only downside is the clutch engages...