rear brake lights

[danny_2132]

well u open the boot and u look inside u see the 2 covers on each side which cover the signal bulbs. between that is a hatch which you have to remove to change the tail lights

im having trouble removing the screws which hold the hatch in place becasue the screws are stuffed.

have a look on page 186,187 on ur manualll

[Spoon SiRG]

Those are not screws. They are plastic clips. You have to push the center part in to pull the whole clip out,all 7 of them. If you have the child seat anchorage point you have to unscrew that as well. Only then you can remove the whole rear plastic trim,& then can you get to your blown tail light bulbs.

[danny_2132]

i tink i kknow wot a screw looks like... hlf are the plastic push in tings and da other hlf are screwss

[An41]

do you mean those hooks(anchors)?

[danny_2132]

see the top one? thats what it looks like but its a black one

i know cause 2 of them screwd out and 2 just keep spinning when i try to unscrew it and the rest of em are that clip thing i just push the thing in the middle

[An41]

i did not have to undo any screws like that, but this might sound stupid but have you loosened it then attempt to pull it out?

[jeffreymui]

try use something to pry it out....is it the black plastic screws? if it fked up...just pry it out and get new plastic plugs

[danny_2132]

yess its da plastic screewss yer i tink i might just pull it out and hopefully nothing breakss.

[adu]

Relaxxx

il do it for u
at maccas

all i need is maccas straws

=]

[danny_2132]

umm not sum old pedo r u lol

[adu]

NAH BRAH
im freakn 19 .. relaxx

[danny_2132]

hahaha jus checking lol