Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 29
  1. #13
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Nice.I might change my badges too.

  2. #14
    Member Array
    Join Date
    Feb 2006
    Location
    Sydney
    Car:
    飯盒
    anyone know how to remove the rear honda badge?
    ...

  3. #15
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by K24A View Post
    anyone know how to remove the rear honda badge?
    with some fishing line.

  4. #16
    I can see you got the bonnet trim code..

    75120-SEA-R01ZE*

    what should i order to replace the chrome one with the colour Graphic gray?

    I have an 03 euro

    Cheers


    Quote Originally Posted by Aslam View Post
    Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

    I got the part numbers off one of the threads here, below is an insert of it.
    EuroR Conversion Parts

    03-05 EuroR front grille 71122-SEA-901ZJ*
    03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
    CL7 front grille EuroR emblem 75732-SEA-R01
    EuroR radiator bulkhead cover 71123-SEA-901
    Rear EuroR badge 75731-SEA-R01
    EP3R Front red H badge 75700-S9A-600
    DC5R Rear red H badge 75700-S5T-E11
    FN2R remote control red H backing 35114-S6M-Q11
    CL7 EuroR intake manifold 17100-RBC-J00
    CL7 EuroR intake manifold cover 17121-RRB-A00
    CL7 EuroR rocker cover 12310-PRC-505
    DC5R red engraved gearknob 54102-S6M-R00

  5. #17
    oopps being a noob think i found it..

    http://www.ozhonda.com/forum/showthr...o+part+numbers


    i think i should order 75120-SEA-R01ZG for graphite gray .....

  6. #18
    Member Array
    Join Date
    Nov 2007
    Location
    South Africa
    Car:
    CL9 K24A3
    Quote Originally Posted by K24A View Post
    anyone know how to remove the rear honda badge?
    Dental floss will reduce paint damage....

    Get some dental floss (any flavour), and run behind the top of the badge only...(its only the thin double sided top tape that holds badge down)..then it just pulls out (no clips to hold badge down).....then you remove the white plastic lugs....then insert new badge which snaps into place

    Here's some pics on my install







    With the snaps on the back of the new badge, cause the badge to be slightly higher...notice the previous position below badge...polished it out eventually

    Last edited by Quest; 27-01-2009 at 02:30 AM. Reason: Added installed pc
    To steal ideas from one person is plagiarism; to steal from many is research. – Steven Wright

  7. #19
    Member Array
    Join Date
    May 2007
    Location
    Blue Mountains
    Car:
    MY06Euro Lux Sat Nav Auto
    Quote Originally Posted by EUR003act View Post
    lol hey! i found the thread...

    yeah that badge you have is the EP3 front badge, not the DC5 rear badge...

    ok so ive found the correct part numbers:

    EP3 Front Red H badge - 75700-S5T-E11
    DC5 Rear Red H badge - 75701-S6M-Z01
    CL9 Front H badge - 75700-S9A-G00

    i mustve got the stock front badge and DC5 badge packaging mixed up

    sorry buddy! i have now corrected my original post... as for the dealer, im suprised he didnt question it when you asked for a rear badge and it came up with a front badge?
    Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

    I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

  8. #20
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by Mike Star View Post
    Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

    I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.
    yeah the one that says CL9 front badge, thats just the plain silver CL9 front badge..

  9. #21
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by Mike Star View Post
    Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

    I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.
    Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.

  10. #22
    Member Array
    Join Date
    May 2007
    Location
    Blue Mountains
    Car:
    MY06Euro Lux Sat Nav Auto
    Quote Originally Posted by tony1234 View Post
    Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.
    Thanks Tony,
    I'll probably bite the bullet and get them. I'll see the next time I have a spare $150 and call my Honda guy and order them.
    Cheers

  11. #23
    Member Array
    Join Date
    Nov 2005
    Location
    Sydney
    Car:
    Eva
    Quote Originally Posted by Aslam View Post
    Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

    I got the part numbers off one of the threads here, below is an insert of it.
    EuroR Conversion Parts

    03-05 EuroR front grille 71122-SEA-901ZJ*
    03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
    CL7 front grille EuroR emblem 75732-SEA-R01
    EuroR radiator bulkhead cover 71123-SEA-901
    Rear EuroR badge 75731-SEA-R01
    EP3R Front red H badge 75700-S9A-600
    DC5R Rear red H badge 75700-S5T-E11
    FN2R remote control red H backing 35114-S6M-Q11
    CL7 EuroR intake manifold 17100-RBC-J00
    CL7 EuroR intake manifold cover 17121-RRB-A00
    CL7 EuroR rocker cover 12310-PRC-505
    DC5R red engraved gearknob 54102-S6M-R00
    Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?
    CL9 Euro Luxury

    Toda - 127kW | Wakefield - 1:19.1 | WSID - 15.4

    QUALITY K-SERIES AND CL9 EURO PARTS FOR SALE

  12. #24
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by integral90 View Post
    Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?
    lol i got those part numbers... theyre all parts i purchased... i can try find the part number for it... im guessing yo want it for the RBC intake?

    ive got an aftermarket CAI for the RBC if you want that as well

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.