Disclaimer: The following are provided as a GUIDE ONLY, and neither myself. nor the original writer, nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Just a guide to install an Ultra Racing front strut bar in a Civic FD

Step 1: Buy the bar hehehe


Step 2: Open the packaging


Step 3: Open the cover for the suspension point by just pulling it off


Step 4: Pull the clips off the cover for the strut bar


Step 5: just pull the cover off...its a bit hard but they r just clips and position the strut bar like so


Step 6: Tighten the nuts supplied by the bar to the existing screw holes in following postion


and just reversed all the steps back to put all the trim back and thats all

heres the finished result