Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 31
  1. #13
    Quote Originally Posted by EUR003act View Post
    1. Yes
    2. No (altough im not 100% on this)
    3. Yes
    4. Yes (no VTC control however)


    May need Greddy V-manage to control VTC?

    I wonder what the yield for Ultimate if tune stock engine only.
    Last edited by free2d; 08-12-2008 at 03:01 AM.

  2. #14
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by TODA AU View Post
    With the dollar the way it is, the Haltech Platinum Interceptor is really good value.
    Does, fuel, ignition, Vtec...
    But no VTC
    Delivers pretty much the same result as the e-manage for less $
    How much would the Haltech cost from you Adrian,inc.tuning etc.all up?

  3. #15
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by free2d View Post
    May need Greddy V-manage to control VTC?

    I wonder what the yield for Ultimate if tune stock engine only.
    yes... greddy v-manage will control VTC...

  4. #16
    Member Array
    Join Date
    May 2005
    Location
    ACT
    Car:
    05 Euro M Red 6
    So if you have other cams like our good buddy justin, then you really need VTC or you wont maximise the gains?Or are we talking minor KW here?

    Also in what way is the new haltech like the Emanage Ultimate? I thought the Haltech was just an interceptor not like the emanage in terms of relearning...
    Last edited by Suntzu; 08-12-2008 at 12:55 PM.
    I went to the modded XR5 Turbo with Mods - the dark side.....BOOOOST!

  5. #17
    Member Array
    Join Date
    Mar 2008
    Location
    Perth
    Car:
    Accord CL9
    any idea what will be lose after tunning with e-managment ecu on a LUX euro? I heard that the Cruise Control will turn off. why?
    Accord Basic

  6. #18
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by Accord Basic View Post
    any idea what will be lose after tunning with e-managment ecu on a LUX euro? I heard that the Cruise Control will turn off. why?
    where'd you hear that from, it shouldn't cause it's a piggyback system.

    unless the piggyback system blocks any signal returning to the stock ECU of the Cruise controls.
    vTeK 4-Life!
    FOR SALE: CL9

  7. #19
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by Suntzu View Post
    So if you have other cams like our good buddy justin, then you really need VTC or you wont maximise the gains?Or are we talking minor KW here?

    Also in what way is the new haltech like the Emanage Ultimate? I thought the Haltech was just an interceptor not like the emanage in terms of relearning...
    VTC seems to be where the biggest gains are seen in the k-series... especially if you go after market cams, 45degree of VTC and correct tuning of it makes big power!

    lol im only running stock K24 cams

    Quote Originally Posted by Accord Basic View Post
    any idea what will be lose after tunning with e-managment ecu on a LUX euro? I heard that the Cruise Control will turn off. why?
    wont loose anything... cruise control works fine...

  8. #20
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    Quote Originally Posted by Adrian Euro View Post
    So would that mean you could get that then run the VAFC2 as the VTC only function? WOuld this meen more power then only using the Platimum intercetor?
    The VAFC2 only controls fuel,
    It inadvertantly changes the ignition timing a little too...
    But has no direct control.
    The Haltech does & it works well.
    As mentioned previously, the VAFC2 can only monitor the VTC...
    For some unknown resason, but it cannot affect it.

    A greddy V-Manage can control VTC & nothing more.
    It can be used together with an E-Manage for conrol of both fuel, ignition & VTC.
    But this is a prety expensive option...

    Quote Originally Posted by tony1234 View Post
    How much would the Haltech cost from you Adrian,inc.tuning etc.all up?
    The prices for this are up in the trader section.
    http://www.ozhonda.com/forum/showthread.php?t=100688

    Quote Originally Posted by TODA AU View Post
    Fixed rates…

    APEXI VAFC II (& similar systems) = $200 (fitting is an extra $150)

    ***Accord CL9 EURO - Haltech Platinum Interceptor - $1500 supplied, fitted & tuned***
    ***DC5 Type S / R - Haltech Platinum Interceptor - $1500 supplied, fitted & tuned***
    Cheers

    Adrian
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  9. #21
    Quote Originally Posted by TODA AU View Post
    With the dollar the way it is, the Haltech Platinum Interceptor is really good value.
    Does, fuel, ignition, Vtec...
    But no VTC
    Delivers pretty much the same result as the e-manage for less $
    Are you sure about the VTEC control? From what I read on the haltech website and the interceptor manual there was no mention of VTEC control...

  10. #22
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    Quote Originally Posted by Suntzu View Post
    So if you have other cams like our good buddy justin, then you really need VTC or you wont maximise the gains?Or are we talking minor KW here?

    Also in what way is the new haltech like the Emanage Ultimate? I thought the Haltech was just an interceptor not like the emanage in terms of relearning...
    If you're in the market for an emanage or Haltech,
    We're not talking massive gains.
    If you want standalone ECU results, you pretty much need to get one.

    The Haltech is similar to the Emanage in that the end result is the same.
    Sure, the way it works is different.
    But with the drop in the Aussie dollar, the Haltech has a cost advantage.

    NB: For both Haltech & E-Manage, moving to larger injectors & cams is really not a good idea. Though you can make it work, it's not ideal particuarly at part throttle where the std O2 sensor is doing it's thing.
    So IMO, if you're going to go that far. You're better using a proper stand alone ECU that can do everything.
    Bare in mind going this way has downside too appart from cost.
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  11. #23
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    Quote Originally Posted by Chris_F View Post
    Are you sure about the VTEC control? From what I read on the haltech website and the interceptor manual there was no mention of VTEC control...
    I know... & the instructions say it's not recommended...
    But the ability is there & it works...
    You need to add a relay & configure the output, but it's no biggie.
    100% the interceptor does VTEC
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  12. #24
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by TODA AU View Post
    NB: For both Haltech & E-Manage, moving to larger injectors & cams is really not a good idea. Though you can make it work, it's not ideal particuarly at part throttle where the std O2 sensor is doing it's thing.
    So IMO, if you're going to go that far. You're better using a proper stand alone ECU that can do everything.
    Bare in mind going this way has downside too appart from cost.
    with emanage you can force the stock ECU into 'open' or 'closed' loop

    for tuning or power purposes...

    plus you can set your own a/f target for the car to hit whilst in 'closed loop'

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.