crank pulley bolt success!

[FAT VTI]

Ebay us mate, they sell them.

just make sure you get the right one.

[LiL FiLo]

breaker bar! does the job every time

[sidewayscivic]

ebay take's 2-3 weeks to arrive, there must be someone here that has one for sale?

[EG5[KRT]]

i got the tool pm me if u wanna get it done.

[sidewayscivic]

pm'ed, does anyone know if autobarn, supercheap or repco has them?

[shadou]

they wouldn't sell such an item to my knowledge, best you'll get from them to help your case would be an air compressor and a rattle gun from China.

[tinkerbell]

paypal me the $50: paypal@jscc.asn.au

http://www.ozhonda.com/forum/showthr...ht=rope+method

[sidewayscivic]

cod only lol

[sidewayscivic]

i went to the honda spare parts at springwood today, and the they dont sell it to the public! if anyone has this tool for sale i will grab it off them ASAP

[shadou]

that's why you go a fabricator, or ebay it like someone stated.

[squish85]

1. put it in gear
2. use something to wedge the fly wheel stuck (I forgot if u need to take a flywheel cover off..
3. Spray tons of WD-40 and leave on to soak
4. Use breaker bar (u're supposed to use a special $300++ honda crank bolt remover tool, but heck you're trying to save $$...)
5. The most difficult part was the limited space for u to turn the breaker bar, if you're not using a floorless lift hoist...
6. Try using your legs (both feet) to to push the breaker bar instead of your hands (better leverage)

* BE WARNED THAT THERE IS A POSSIBLITY TO BREAKING THAT BOLT OR DAMAGING YOUR FLYWHEEL....

Hopes this helps..

[sidewayscivic]

yay! i got if off thanks to OMGZILLA! for lending me the pulley tool. all i used was REPCO extensions 1/2" 2x 250mm, 1/2" breaker bar and a 19mm socket. i used kincrome and sidchrome extensions but they all snapped.