...........................................
Last edited by underbelly; 08-11-2009 at 01:59 PM.
you didnt look hard enough. http://ozhonda.com/forum/showpost.ph...07&postcount=6 and yes, u need to remove all the panels
just to let you know I followed that exact guide and i manged to chnage my head unit. (and i live in australia and have an australian delivered EJ8). http://www.groundupgarage.com/episode-2.html - see how the whole underdash bit is gone? u need to remove it to access the bolt that holds the HU to the dash. u need to remove the panels. its not that hard. if u find u removed a panel unnecesarily, then just screw it back on. its your car, dont be afraid to play around with it. Just get out there, and go do it. */leaves thread*
Last edited by SiReal; 01-01-2009 at 11:49 AM.
i used the same guide on installdr to install a headunit into my ek, once you take the panels off its pretty easy to figure out what needs to be unscrewed unpluged etc.
Forum Rules
Bookmarks