DC2 & DC2-R OEM brake pad part numbers

[dynosaur]

Hi every1,

I would like to get the OEM part numbers of these brake pads. Any1 can tell me? Thanks alots

DC2-R (Front)brake pads :
DC2-R (Rear)brake pads :

DC2 VTiR (Front) brake pads :
DC2 VTiR (Rear) brake :

[F.O.B Squad]

DC2-R (Front)brake pads :45022ST7R02
DC2-R (Rear)brake pads :43022SV4G22

DC2 VTiR (Front) brake pads :45022ST7406
DC2 VTiR (Rear) brake :43022SR030

Hope that helps.

[dynosaur]

1st I have to make it clear first. My car is JDM DC2-R (96 Spec)


some1 told me the

DC2-R (Rear): 43022-SV4-A00 (for nissin 9CLP-14S caliper)

DC2 VTiR (Front): 45022-S04-V10 or 45022-S04-V01 (for nissin 16CL-14VN caliper)
DC2 VTiR (Rear): 43022-SR3-010 (for nissin 7CLP-13S caliper)

these part number really make me confused (

[F.O.B Squad]

So its the 4 stud spec (4x114.3) ITR? Just to clarify.

[EG CIVIC]

So its the 4 stud spec (4x114.3) ITR? Just to clarify.

96 spec JDM ITR is 4x114.3

[dynosaur]

yes, 114.3x4. But the PCD is not the main issue in this topic

I am looking for the part numbers

[90LAN]

im pretty sure 96 spec is the same size as dc2 vtir size

[dynosaur]

im pretty sure 96 spec is the same size as dc2 vtir size

front or rear ?

[90LAN]

front or rear ?

both they are the same size as vtir just 4x114(96spec)
i had a set compared them to my eg6 ones exactly the same size

[dynosaur]

just now i went out to check my Rear caliper, I found out my caliper is 7CLP13S.

so what part number of the (Rear)brake pads I should get?

[dynosaur]

both they are the same size as vtir just 4x114
i had a set compared them to my eg6 ones exactly the same size

huh!? VTiR PCD is 114.3x4? I though it was 100x4.... some1 can verify it ?

thanks

[90LAN]

huh!? VTiR PCD is 114.3x4? I though it was 100x4.... some1 can verify it ?

thanks

vtir is 4x100 and dc2r 96 is 4x114

what i said before previously