Gt2876r

**Limbo** · 05-04-2009 09:49 AM

yeah i hear ya, but i've already got the turbo and the parts.

But on another note, i think i might have a gt2871r now that i've been researching more.
I took the guy's word that it was a gt2876, but now that i've been looking around. It seems the gt2876 was never offered in the gt28r front compressor housing trim.
HKS offerred it in that trim, but they are badged HKS. With the Garrett range only the gt2871r seems to be offered in that front trim. The garrett tag was abit faded and i never looked. ALso the inducer is only .8mm difference so i never bothered measuring also

Will keep posted on what i got...

**FastFwd** · 15-04-2009 09:09 AM

Limbo just do what i did last night. get the serial number from the badge of the turbo. Then google it. It will tell you exactly what turbo you have. Then you can also see what compressor housing it has by what it says on the front of the compressor, and the same with the trim on the exhaust end. E.g

Ok guys this is the details i gathered of the turbo, so i finally know what turbo i have now and what i can push it to.

Compressor housing:
Garret A/R60 m24 1-2

Exhaust housing:
Garret 0.64

Badge:
DI 0334J
1441-G1f00
466541-4

The turbo is know as the GT2560R-4 (aka gt28r) which can take upto 330hp and has a max efficiency rating at around 14-16psi depending on the setup. It has a really quick spool and its nice but it just lacks alot in the top end.

http://www.turbobygarrett.com/turbob...R_466541_4.htm

http://www.ozhonda.com/forum/showthr...=104177&page=2