Adjustable Endlinks for OEM DC2R rear sway bar/lca set up

[tRipitaka]

anyone know of any companies who make aftermarket endlinks for the OEM DC2R sway bar to fit OEM LCA's ?

any reviews/opinions ?

[nd55]

function7

[e240]

Whiteline

[DNYALL]

I got function7 adjustable endlinks, havn't installed em yet though. will do it asap

[tRipitaka]

i believe the function7 endlinks only fit with the f7 lca's.. (in regards to DC2R.. not sure with EK)

any idea whether the whiteline endlinks work with an oem setup ?

[fatboyz39]

blox makes rear endlinks.

[tRipitaka]

blox makes rear endlinks.

i noticed them on ebay..
but they mention that they're designed specifically for the blox rear sway bar ?

[97EK1]

generally all those blox/F7 endlinks are just adjustable rod ends with males and females put together you can get from any fastener shop really, so just get the correct size. Thats what i did with my ek9 22mm sway and with my F7 Lower Control arms hope it helps with the dc2R one as well.

[EG5]

all adjustable endlinks are pretty much the same it can be modify to fit both OEM or aftermarket control arms.

you just pay more for quality spherical bearings that last long and won't make noise.

[STiR]

No problem is bolt size also, swaybar mounting requires smaller diameter bolt if I remember correctly

[fatboyz39]

i noticed them on ebay..
but they mention that they're designed specifically for the blox rear sway bar ?

Really? Im using them on stock DC2R rear swaybar and been working fine for over 6months.

[tRipitaka]

Really? Im using them on stock DC2R rear swaybar and been working fine for over 6months.

dunno..
just going by what they say in the product description

http://cgi.ebay.com/ebaymotors/BLOX-...ht_4868wt_1047

are you running stock dc2r LCA's ?
also, are you using the stock bolts to connect the endlinks to the LCA's ? or are you using the blox bolts ?