Aftermarket engine & torque mounts.

[Lukezen27]

guys i just finished hasport 3 x mount kit on a DC2 vtir - pain in the ass. Very doable , just a bunch of levering forward and back and you will get there eventually.

Did you need to remove the dump pipe or header in your case Ben?

I'm going to try and do the rear mount myself if you don't have to touch the exhaust.

[bennjamin]

Did you need to remove the dump pipe or header in your case Ben?

I'm going to try and do the rear mount myself if you don't have to touch the exhaust.

you will have to remove the dump pipe to do the rear mount

[Lukezen27]

you will have to remove the dump pipe to do the rear mount

that means I have to remove the manifold turbo as well.....


Fok!

[DLO01]

Just see how it goes. I did not remove mine to do the rear.

[Lukezen27]

Still not dry

Looks like I'll be busing it for a few days dang it!

[Lerlo]

My first one, I filled it up full.....1 week later and the inside still wasnt dry.. I just installed it anyways

[geeang]

Used billet innovatives in my build, there are extra vibrations but I LOVE it!

Shifts are much crisper, really feels like it puts the power down much more efficiently.