Page 1 of 2 12 LastLast
Results 1 to 12 of 15
  1. #1
    Member Array
    Join Date
    Nov 2003
    Location
    Sunshinecoast
    Car:
    5th Gen Prelude
    im getting lovell springs as in there on order i got a 96 vti-s
    i didnt realy measure.. so i ordered 3 inch in the rear and 2 1/2 in the frount do you guys thik this is too much

    cheers

  2. #2
    Member Array
    Join Date
    Aug 2003
    Location
    Sydney
    Car:
    94 Accord Vti-S
    its pretty common to have it done that low.
    but i reckon its farkin impracticle...
    is ur 96 the 5th gen? if its a 5th gen, they r low from factory, so 3in is hella low.

  3. #3
    Member Array
    Join Date
    Nov 2003
    Location
    Sunshinecoast
    Car:
    5th Gen Prelude
    i think its the 5th, is the 5th with the 4 piece tail lights, at the moment it looks fairly 4by
    ............

  4. #4
    Member Array
    Join Date
    Aug 2003
    Location
    Sydney
    Car:
    94 Accord Vti-S
    yeh, the same one as poids.
    i think he's done his 3in drop aswell, with 18's i believe? or only 17's? i dunno. lol.

  5. #5
    lol your asking for a "few" scrapes here and there post sum pics when ur done lol
    フジタエンジニアリング

  6. #6
    Member Array
    Join Date
    Aug 2003
    Location
    OZH-VIC
    Car:
    BLZ-ARW021
    i reckon 3 inch would be too much.... 2 - 2.5 max i reckon!!

    meh..my 2c!

  7. #7
    Member Array
    Join Date
    Aug 2003
    Car:
    Accord Vti-S turbo
    Mine's dropped 2.5" all round, 3" is nice if the springs are stiff enough and you're prepared to drive very careful and take some scraping (gonna drop the front another 1/2 inch soonish) but i wouldnt drop the rear more than the front, the rear already looks slightly lower when dropping it by the same amount all round.

    Hope the springs arent soft man, if they are you'll be in a world of hurt

    And yeh 18's calvo, 17's are too small on a 5th gen :P

    EDIT: i did have 3" lowered springs by the way, they were no where near hard enough and the car was basically undrivable...so i went with a 2.5" lowered much stiffer compromise


  8. #8
    Member Array
    Join Date
    Nov 2003
    Location
    Sunshinecoast
    Car:
    5th Gen Prelude
    oh well if its too low ill just sell it either too someone who wants them or an idot like me.. :roll: ....... ive heard that you can get the springs streach out a bit is this true
    ............

  9. #9
    i hope youve got lowered shocks to match..
    or youll have a head-ache everytime you step out of your car!

  10. #10
    Member Array
    Join Date
    Sep 2003
    Location
    Melbourne
    Car:
    datsun 200b
    haha join the group man
    mine is lowered 3 inch 3 1/2 i think
    i am not really sure but mine is very low atm..
    ohh wells.. its not too bad.. just the ride is very very stiff and abnormal

    anywayz enjoy the low ride



    Ken
    VTEC+Turbo=dirty underpants

  11. #11
    Member Array
    Join Date
    Aug 2003
    Car:
    Accord Vti-S turbo
    Quote Originally Posted by one more chance
    i hope youve got lowered shocks to match..
    or youll have a head-ache everytime you step out of your car!
    yes indeed, you need some shocks...they dont necessarily need to be shortened, my stock length koni's do the trick (though that is with the stiff springs and Koni progressive rate bumpstops)


  12. #12
    Member Array
    Join Date
    Aug 2003
    Location
    Sydney
    Car:
    Integra turbo
    it'll b fine.. still driveable, unless u got a bodykit =)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.