Page 1 of 2 12 LastLast
Results 1 to 12 of 20
  1. #1
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    Dc2 Vti-R

    DC2 B18C engine problem

    hello my car has been turning off lately wen i drive and the engine light comes on when the car just suddenly shuts down, but then i try turning it on again but it doesnt. but if i wait for like 10mins-20mins and try it again it turns on?????

    can someone help

  2. #2
    Member Array
    Join Date
    Aug 2008
    Location
    Vic
    Car:
    DC5R
    Happened to me too, it can either be ur Distributor or your Fuel Relay (which is a chip) or even ur fuel pump. I had to change the Fuel Relay for mine and it fixed it up.

  3. #3
    Member Array
    Join Date
    Apr 2005
    Location
    Melbourne
    Car:
    ( . )_( . )
    yup possibly the fuel relay - there is a DIY resolder mod in the diy section by ecuman, open up ur dizzy cap for cracks and lots of whiteish powder - good sign its stuffed.

  4. #4
    Fuel pump relay or ignition coil which is located in distributor, resolder fix is quite tricky if you dont know what your doing. when it cuts out see if you have fuel pressure by undoing the top 17mm bolt on your fuel filter which is located next to your brake master cylinder... then turn ignition on if no fuel comes out then replace fuel relay. if it does then replace ignition coil.....

  5. #5
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    Dc2 Vti-R
    OH THANKS heaps for all info i will try all
    thanks heaps i really appreciate it
    ill come bak if i have problems

  6. #6
    check your main relay
    JDMYard Eg civic lsvtec 1.04:1 WAKEFIELD PARK
    Bel Garage Dc2r/Neptune ecu
    SUPERLAP 2010 clubsprint FF na winner
    1.54.81 street tyre

  7. #7
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    Dc2 Vti-R
    yeah i checked it and its look like need solder
    but i was wondering if the main relay from dc2r would work in my dc2 vtir?

  8. #8
    Member Array
    Join Date
    May 2007
    Location
    BNE
    Car:
    DC2 K20
    yes it wud work
    FS thread OMG heaps of parts for dc2/eg/ek wrecking eg vti!: http://www.ozhonda.com/forum/showthread.php?t=111753

  9. #9
    Same relay, what you are looking for is tiney craks around the base of the solder when you take the cover off.

  10. #10
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    Dc2 Vti-R
    hey i have bought a main relay still waiting to come and
    just wondering could it be the MAP sensor?

  11. #11
    Classic main fuel relay symptoms. Resolder the connections and you're good as gold (even if they don't appear cracked they can still be faulty).

  12. #12
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    Dc2 Vti-R
    ok thanks man

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.