Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim: To Tuck the Winderscreen washer bottle in the gen 3 integra and make it looks more neat.

Required:
10mm socket and wrench
washer bottle from 98 spec jdm ITR
gromet ( which i got from the firewall of my other integra)


Step 1

First that off your front bumper,

refer to this if you dont know how to take it off
front bumper removal

Step 2

Locate the washer bottle on the passenger side of the car
and remove the old washer bottle out. And install the new washer bottle.



Step 3

98 spec vs 96 spec
Notice how the 98 spec hose is bendable, it can also be detached.
So once u fill it with water detach the hose.


Step 4
Plug the hole on top of the washer bottle with the grommet from the fire
wall. Surprisingly it fits pretty well . It can also be used for the rear wiper
delete if you want to get rid of yours


And the finish product should look like this



C&C welcome


I know the rest of my engine bay looks messy.. ill get to that next time