-
DIY B16A2 Swap Progress *[Part 1]*
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
PART 1
Since we r unable to get our hand on a JDM EG6 halfcut, my mate have decided to forget bout the additional 10hp and go for the AUDM vtir halfcut instead. The swap is still far from done but we have decided to document it as we go along.
The A/T D16Y4 still in my mate's CXI
B16A2 out from a wreck VTIR
Miscellenous stuffs, i.e pedals assembly need for conversion from auto to manual, shafts, radiator, shift linkage etc, etc...
The VTIR looms, theres more but tats about all we need for the swap.
First and foremost, we stripped the whole interior, so as to swap the vtir loom in.
The vti loom is more or less in placed now, but there is a problem, we cant seems to find the connector to the ceiling light now. we have labeled every connector but the vtir loom seems to be missing that connector. we decided to leave this till a later stage and begin stripping the engine bay first.
That is all for now. more to come.
Wynode edit: Fixed up images + disclaimer
Last edited by DCLXVI; 19-11-2004 at 12:47 AM.
-
Looking good.......glad to see someone documenting this......you efforts will pay off!
-
Yeah, I wish I'd taken photos and stuff when my swap was done
-
-
For the axle nut.......weq suggested a realy good way.
Use a breaker bar and hold it firm agains the ground, start the car up, put it in first, and let the clutch out kind of quickly!......Basically you're using the torque of the engine to turn thet nut (haven't tried it myself, but he said it worked).
As for the ball joint........thanks for that link, it finally makes sense now!
Keep the updates coming
-
i know this is out of topic, but may i know how much you spent on the half cut vti-r ??heaps thx
-
Team Bacchus Racing Lexus ISF
Bacchus Energy drink
Drive your Energy
-
excelent!! keep it going!!
-
Good work stan! You forgot to give me a call to come round n help!!
Didn't know you started yet, gimme a call
Originally Posted by z3lda
ey, was drivin a honda city before...
felt like the biggest poofter in the world..LOL
-
thanks for dropping by today, james.. wasnt feeling well today.. fever and a bad cough.. so no work done today..
-
-
hurry stan n kah hong!! finish it upp!! cant wait to take a ride in dat car dude, ahaha, i'll drop by next week to see wat i can help, but obviously both of u wouldnt let me touch anythingg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks