Calibrating the Voltage on the TPS

[DEMON83]

good stuff! keep it up

[beeza]

Thanks Leighton!!

LOVE ya Aviator pic mate!!!

SEXY AS

[beeza]

So,anyone done this yet?

[tiksie]

I did, but it didn't make a noticeable difference for me on the b16a :/

[beeza]

Did you do exactly as in the DIY Tiksie?

So when the pedal hits the floor at the same time the throttle plate makes contact with the WOT stop,with a reading of 4.5V

At idle there is no free play in the pedal or accelerator cable and the throttle plate makes contact with the throttle stop screw with a reading of 0.48V

Adjust the idle via the idle screw and reset the ECU?

Also make sure the timing is set correctly.

What were the readings before?

I`m almost convinced something was not done correctly.

[tiksie]

Did everything the right way dude Nothing changed (I Didn't feel a change anyway).

[beeza]

Damn,do U know the voltages before?

What engine is yours tiksie.

I`m suprised aye.

[tiksie]

Jdm b16a

Yeah voltages were off before by about 0.05 - 0.10

[beeza]

Cheers Tiksie.

[beeza]

Anyone else done this yet or are ya'll lazy bones?

[ewendc2r]

doing it tomorrow actually ...

[beeza]

Oh,great to hear man,cheers.

Any questions PM me and hopefully I can help!