Page 1 of 2 12 LastLast
Results 1 to 12 of 21
  1. #1
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2

    Unhappy why does my car not want to start for me

    ok i have just rebuilt my b18c2 pulled the whole motor out. now that it is back in it wnt start it cranks and sounds like it wants 2 but just doesnt. ive got hi comp pistons and crower cams. pulled the cams out and put standard 1s back in and cranked easier but u guessed it, it didnt start. timing is 100%. thought it was immobiliser so disconnected it and still the same. could it b vaccum. help please its been collecting dust for 2 long and i want it started. any feed back would b great

  2. #2
    Member Array
    Join Date
    Feb 2008
    Location
    Brisbane
    Car:
    Dc2 + EG
    Have you checked your spark?

  3. #3
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    civic EK9
    Do you have stock ecu or aftermarket?

  4. #4
    Member Array
    Join Date
    Aug 2006
    Location
    Adelaide
    Car:
    EJ B20vtecTurbo
    This may sound stupid but have you adjust the valve clearances?
    EDGE AUTOMOTIVE

  5. #5
    Account Disabled Array
    Join Date
    Jul 2009
    Location
    brisbane
    Car:
    integra
    Quote Originally Posted by Edgeauto View Post
    This may sound stupid but have you adjust the valve clearances?
    or even the battery??

  6. #6
    Ozhonda Supporter Array
    Join Date
    Jul 2004
    Location
    Brisbane
    Car:
    MV Agusta F4
    Why would it be the Batt if he says it cranks over.

    Check fuel and spark.
    Deano.

  7. #7
    Member Array
    Join Date
    Apr 2005
    Location
    Melbourne
    Car:
    ( . )_( . )
    ^ as above, check fuel pump, relays, fuses, starter motor, spark plugs, dizzy, ign leads and all grounding points

    check the batt too, may need more cranking power cranks but wont crank over to start deano!

  8. #8
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2
    Quote Originally Posted by lil_foy View Post
    Have you checked your spark?
    checked that cause it zapped me all leads r firing

  9. #9
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2
    Quote Originally Posted by CTR_EK9 View Post
    Do you have stock ecu or aftermarket?
    its a stock ecu

  10. #10
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2
    Quote Originally Posted by Edgeauto View Post
    This may sound stupid but have you adjust the valve clearances?
    they r all 100%

  11. #11
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2
    Quote Originally Posted by blakee View Post
    or even the battery??
    brand new fully charged pulse battery so plenty of cca

  12. #12
    Member Array
    Join Date
    Sep 2008
    Location
    western sydney
    Car:
    DC2
    Quote Originally Posted by EGB18CT View Post
    ^ as above, check fuel pump, relays, fuses, starter motor, spark plugs, dizzy, ign leads and all grounding points
    brand new walbro fuel pump already checked ign relays and fuses starter motor is fine cause it cranks the car brand new plugs with the dizzy if u turn it all 1 way it cranks alot harder than the other

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.