why does my car not want to start for me

**EGB18CT** · 14-10-2009 09:16 PM

now since you have a new walbro, are you getting fuel to the motor? new fuel filter (ie. been installed to flow the right way etc), injectors all connected up fine? sounds like its not getting fuel, check wiring on your fuel pump.

was a leakdown test done to ensure engine put together ok?

**DWU** · 14-10-2009 10:46 PM

with your new Walbro fuel pump can you hear it prime when you put it in ignition? It should whir for about a second.

**chubby steve** · 16-10-2009 03:31 PM

Originally Posted by EGB18CT

now since you have a new walbro, are you getting fuel to the motor? new fuel filter (ie. been installed to flow the right way etc), injectors all connected up fine? sounds like its not getting fuel, check wiring on your fuel pump.

was a leakdown test done to ensure engine put together ok?

the injectors r working all fine so its getting fuel wiring is fine no leakdown test done wat is it and how is it done

**chubby steve** · 16-10-2009 03:32 PM

Originally Posted by DWU

with your new Walbro fuel pump can you hear it prime when you put it in ignition? It should whir for about a second.

i let it prime everytime i try 2 start it

**chubby steve** · 24-10-2009 06:48 PM

http://www.youtube.com/watch?v=7wh2ywdwGec

i made a video if it helps

**saikou27** · 24-10-2009 07:01 PM

by the look of that video ur starter motor doesnt look like its even cranking cause the engines not shaking. i may be wrong of course but maybe there a problem with the starter motor.