Installing BC Coilovers

[burner42]

hi guys, just got some coilovers, are there any tips on what i should and shouldn't do? in terms of height adjustments, do i need to remove the top hat from the old springs? This is similar to what i have



I want to do this correctly the first time and not f***k it up

thanks in advance

[rk 86 wa]

to be honest. from personal experience, take it to a shop and watch them do it if its your first time lol.

[040501912]

if they came with the top hat.. its jus simply remove and replace =)

[mocchi]

you should read your car service manual on how to remove/install.
you should get the tools ready before you try diy.

you shouldn't try to do diy without doing the 2 stuff i mentioned above.

anyone would agree with me that installing coilovers are easy. having someone else to install them is a waste of money.
tuning them on the car is a different matter i guess.

[burner42]

i can install it, just the matter of tuning it is what i'm not sure about that's all

[rossirider]

i can install it, just the matter of tuning it is what i'm not sure about that's all

What do you mean by tuning? damper settings or alignment settings?. When you say you want to do it right the first time, get the car aligned to your specific settings and corner balanced.

in general, if you want the car to oversteer more, up the rear dampers and lower the fronts. If you want it to understeer vice versa.

[beeza]

Ah,ya got em',sweet!

Let us know how they are aye

[blabla]

hi guys, just got some coilovers, are there any tips on what i should and shouldn't do? in terms of height adjustments, do i need to remove the top hat from the old springs? This is similar to what i have



I want to do this correctly the first time and not f***k it up

thanks in advance

Which model did you get, where from and how much?
Wholesale sussy are selling the NZ model.

http://www.bcracing.co.nz/index.php?...va-design.html (NZ WEBSITE)

http://www.bc-racing.com.au/products.html (AUS WEBSITE)

[rk 86 wa]

Are you their spokesperson or something? ^^^^^

[blabla]

Are you their spokesperson or something? ^^^^^

Nope i just want to know coz I want to get some for my car and the g/f car. I want to make sure they are the correct one that should be sold here.

[MRK20CRX]

are these for your model car specific? or for an ek4 etc, they good quality coilovers, real easy to sway over

[burner42]

Which model did you get, where from and how much?
Wholesale sussy are selling the NZ model.

http://www.bcracing.co.nz/index.php?...va-design.html (NZ WEBSITE)

http://www.bc-racing.com.au/products.html (AUS WEBSITE)

their not my ones, just similar, but on my box they say it's from Taiwan, i got mine through ebay, but you can contact Just Jap Imports, the invoice they gave me had their details on it. Was 1100 shipped to my door

series was the BR series Coilovers