Paint Side Mouldings

[ekcoupe]

Hi guys,
i am going to get my plastic side mouldings colour coded. i just want an idea on how much it will cost?
also if anyone could recommend someone or if they do it them selves

[EK1.6LCIV]

got mine done when I did my mirrors, the primer and paint was more expensive than regular paint.

if you don't prep it right it just will flake off in a matter of months, the last guy who helped us out used a german brand of primer & paint, will get the name off him, or if you're on the northside I could send you there?

was around a few hundred dollars for the job

they have a nice panel shop outside of miame that sorted our s13 before we owned it

[ekcoupe]

thanks ryan i might check em out and im around the southside in palm beach

[flipfire]

Should cost around $150 to get it professionally sprayed, maybe even cheaper if you prep it. Its only 2 long strips.

You can DIY, just make sure you use plastic primer and sand it properly.

[ekcoupe]

thanks mate, i dont trust myself doing a diy

[EK1.6LCIV]

prepping the side moulds is a job for a skilled professional, they're a 'pimply' plastic that is treated during the mould which is why it's better off having a workshop do it as it's cheaper and mine has lasted 5yrs+ now, very happy

[quang]

i'm curious about this too, and i'm willing to drive to syd to get it done, seems that canberra is way expensive, unless someone can tell me otherwise. would the shop take to mouldings off the car and spray or leave them on?

[ekcoupe]

they would probably take em off. im geting mine done for 100 whenever i get a chance

[[daan]]

wow i just did mine in my driveway- sanded, plastic primed and just sprayed the damn thing (covered car up with newspaper) only cost $50 or so...






sprayed the skirts/lip in the same manner. its a civic after all.... give it a try. if you bung it up then get someone to do it for you..

[ekcoupe]

ur cars lookn good

[quang]

daan, where did you get your paint from? spray can or air gun?

[ekcoupe]

u can use a spray paint can i found a diy on here, now im thinking of doing it myself
heres the link