There are no holes behind the "accord" and "vti-s" badges. 8)
To remove dem...heat it with either a hairdryer or heat gun for bout 1-2 mins. Use a thin string and slide it behind the badge(s) from one side to the oder. If you get stuck, heat it up again.
After removing the badge, clean up the glue residue (if any) with soap and water.
Good Luck!!
I will not take responsibility of ur actions. I am here to guide you only. If your paint work has chipped or distort or is damaged, blame urself for not being careful and for not taking it to a pro to do it. Cheers!! :P
yeah, better idea but dont hair dry it, use WD-40, spray behind the badge kindo f spray above it adnd let it run down the back of the badge and leave it for 5 mins and get floss and run it behnd the badges and cut the sticky off, and when theyre off it wil have some gluey sticky stuff behind it so spray it with WD-40 and leave it for 5-10 mins and then wipe of with cloth or better yet use finger nail, coz it wont scratch the paint work like another tool would. good luck on the de badging, i did it too it looks sweet!
Bookmarks