Wheels.

[mrprelude]

Apologies for hijacking the thread. I'm also looking at wheels at the moment for my s2000. The buddyclub qf's I'm looking at come in 17x8 with +35 offset. Is that too aggressive (i.e will the wheel come out of the guards). Intend to keep standard suspension and camber.

[ncmx5]

thats too aggressive. i'll stick out.

i'm running +45 and it's right on the edge. -2 deg front, and -2.5 rear. need more camber. hahaha and a roll. stock suspension.

[mrprelude]

thats too aggressive. i'll stick out.

i'm running +45 and it's right on the edge. -2 deg front, and -2.5 rear. need more camber. hahaha and a roll. stock suspension.

Thanks. Looks like I'll have to keep looking for something suitable.

[ludecrs]

8 + 35 is what I roll on.

FOlded fenders, and about 2.8 degrees negative camber, however I'm on an 18" rim.

17" you will piss it in ; if thats the look you want.

[Hondaz]

Hi.. anyone using 17 x 8.5 225/45/17 front and rear? i got a set of Te37. still fit well at the rear one ?
Cheers..

[JAP-S2K]

Easy fit, but that all depends on your offset... what offset are they. If they are less than +45, you may have some issues. As ride height and whether your guards are rolled, these are all important factors.

[mrprelude]

It does help to try different rims on before purchasing one otherwise your never really sure how it will look. I'd like to fit 17x9 front and back to fit a wider tyre for when I take it down to Winton every once and awhile.

[Hondaz]

Both of the offset are +31.. car currently installed Ap2 kit. should be ok ?

[JAP-S2K]

It's an agressive offset, it will stick out a bit.