Results 1 to 6 of 6

Thread: OEM hids

  1. #1
    Member Array
    Join Date
    Oct 2009
    Location
    Adelaide/Melbourne
    Car:
    '04 Euro Lux

    OEM hids

    hi, i was wondering if anyone knew wat type and specs of the OEM hid bulbs?

    so far i know its a D2S

    does it matter if its phillips or the osram? does it matter?

    any help would be much appreciated, as i only have the one light left =( so i cant realli drive it at night...

  2. #2
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by ricerockets View Post
    hi, i was wondering if anyone knew wat type and specs of the OEM hid bulbs?

    so far i know its a D2S

    does it matter if its phillips or the osram? does it matter?

    any help would be much appreciated, as i only have the one light left =( so i cant realli drive it at night...
    Not sure of manufacturer but output is 4300k.You'll most likely have to replace both as you'll notice a slight colour variation in output.This is a good option!!Look here.http://www.ozhonda.com/forum/showthread.php?t=129186

  3. #3
    Member Array
    Join Date
    Mar 2005
    Location
    Sydney, NSW
    Car:
    Accord Euro Lux
    I believe OEM is Osram.

    Does not matter if its Osram or Philips, both are made in Germany and both used in OE. Just make sure they are D2S.

    If you need to replace one bulb, you can hunt around for Color Match ones, the product codes end in "CM", these are hard to source. Description from Philips "Designed for drivers who only need to replace one lamp, ColorMatch lamps replicate the color of your existing lamp"

    You might as well change to a higher K rating, I think of changing my HID bulbs to these Philips 85122WX (6000K), direct replacement.
    Last edited by tpphan; 12-03-2010 at 01:41 PM.

  4. #4
    Member Array
    Join Date
    Oct 2009
    Location
    Adelaide/Melbourne
    Car:
    '04 Euro Lux
    Quote Originally Posted by tpphan View Post
    I believe OEM is Osram.

    Does not matter if its Osram or Philips, both are made in Germany and both used in OE. Just make sure they are D2S.

    If you need to replace one bulb, you can hunt around for Color Match ones, the product codes end in "CM", these are hard to source. Description from Philips "Designed for drivers who only need to replace one lamp, ColorMatch lamps replicate the color of your existing lamp"

    You might as well change to a higher K rating, I think of changing my HID bulbs to these Philips 85122WX (6000K), direct replacement.
    yea i was thinking about changing from 4300k to the 6000k but am still unsure since im yet to see anyone with the 6000k in real life and the 4300k are a pretty nice colour anyway the 8000k though are a bit too blue for my liking haha

  5. #5
    Member Array
    Join Date
    Sep 2007
    Location
    VIC
    Car:
    CL9 Limited Edition
    I'm running 6000K, their not that much bluer than 4300K, but they perform slightly worse than 4300K in terms of visibility. They just look better imo.

  6. #6
    it depends really on which brand of HID u use. Im currently using Mtec on my cu2 lux and the colour is perfect. very nice touch of pure white colour and it does imporves visibility in the dark especially where there is no street light. However, i have had experiences with made in china's porducts on my FD. The colour wise might differ from your left headlight and your right. Also my mates has 6000k in his FD and the colour slightly differs from mine.
    IN3RTIA

    ESPELIR Springs | 6000k MTEC | WORK GS1 | INJEN Cold Air Intake | Honda Access Kits | Fujitsubo Exhaust

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.