Results 1 to 3 of 3
  1. #1
    Newcomer Array
    Join Date
    Apr 2006
    Location
    Liverpool
    Car:
    CL9

    Trying to install HID's

    i tried to installed my HID's plugged in right 1 working fine charging up and everything , then when i put in my left one i plugged up wires every things fine i turned it on both lights would light up for about 3 seconds then go out . It kept happening then when i tried putting back the normal lights the left headlight aint turning on now what do i do?

  2. #2
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Did you use a relay so that the HIDs were powered straight from the battery? If you didn't and instead relied on the headlight wire to power the HIDs, then you might have fried your wires to a crisp. Check your fuses too.
    --------------------------------------
    Stocky CL9 - 1:17.2

  3. #3
    Newcomer Array
    Join Date
    Apr 2006
    Location
    Liverpool
    Car:
    CL9
    i checked the fuses they were normal but now my headlights only turn on for a couple seconds then turn off i have to rely on my high beams at night i got to go to auto electrician tomorrow

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.