View Poll Results: Should we relabel this thread ***Official What did you do to your EG/EK today***?
- Voters
- 260. You may not vote on this poll
-
25-10-2013 05:30 PM
#4261
Originally Posted by Honda
How much did you get it for and where?
According to Honda in Wollongong (don't know if anyone else can confirm), but parts are no longer available for the EK4/EM1 rsb except the self-locking nuts, everything else came up on the computer as no longer available when searching the Australian parts database. And the US prices on this site are up to 5 times cheaper, compared to what Honda would charge you, if they could get the parts.
For example, Honda gave me a trade price of $153 EACH for the end links (normal retail is $276), while on this site they are less than $50 each. Massive difference.
For complete rsb setup, including the bar it was $AU220. With delivery to Australia it's a total cost of about $300 delivered to my door. And it's all OEM/ brand new, not 15 years old.
I set up a US shipping address at MyUS.com, which cost a one-off fee of $10.
Hopefully it should give my car a closer to neutral setup combined with the 22mm fsb...
http://www.hondapartscheap.com/parts...rear-lower-arm
-
25-10-2013 05:43 PM
#4262
Lmzo. A sway bar has not much difference in integrity used vs new. The endlinks/bushes/brackets yes. But the sway bar is just a bar.
As long as the bar hasn't gone past its elastic limit (which it shouldn't on a car), it'll be the same as a bnib bar.
Last edited by joyride; Today at 07:26 AM. Reason: Ask for permission if you're going to use someone elses pic
-
25-10-2013 08:50 PM
#4263
Originally Posted by Alvis
According to Honda in Wollongong (don't know if anyone else can confirm), but parts are no longer available for the EK4/EM1 rsb except the self-locking nuts, everything else came up on the computer as no longer available when searching the Australian parts database. And the US prices on this site are up to 5 times cheaper, compared to what Honda would charge you, if they could get the parts.
For example, Honda gave me a trade price of $153 EACH for the end links (normal retail is $276), while on this site they are less than $50 each. Massive difference.
For complete rsb setup, including the bar it was $AU220. With delivery to Australia it's a total cost of about $300 delivered to my door. And it's all OEM/ brand new, not 15 years old.
I set up a US shipping address at MyUS.com, which cost a one-off fee of $10.
Hopefully it should give my car a closer to neutral setup combined with the 22mm fsb...
http://www.hondapartscheap.com/parts...rear-lower-arm
no offense but you could have got 2nd hand ek9 22mm rsb for around that with decent endlinks and bushes, maybe even less
for roughly 400 total you could have got a subframe reinforcement too
could also upgrade fsb to a 26mm from ek4/em1/ek9 too for not much..
-
25-10-2013 08:52 PM
#4264
size doesnt matter. you better learn that
KEEP IT VIET | KEEP IT JDM FaLL iN LoVe WheN YoU aRe ReAdY, NoT WhEN YoU ARe LOnEly
-
25-10-2013 08:53 PM
#4265
I picked up my ek4 16mm rear sway bar + unknown condition endlinks for $20
btw noob question ctx or PHO: how do you tell if the endlinks are gone besides from hearing noises after its on the car.
Genius....Rad Car......why not have both?
-
25-10-2013 08:56 PM
#4266
Check for play in the endlinks. Move the bolt around (the stud that sticks out of the rubber) Its allowed to pivot but if you can move it in and out, side to side. Its gone, Shouldn't have any play, should only pivot.
Last edited by joyride; Today at 07:26 AM. Reason: Ask for permission if you're going to use someone elses pic
-
25-10-2013 09:00 PM
#4267
Originally Posted by PHO
Check for play in the endlinks. Move the bolt around (the stud that sticks out of the rubber) Its allowed to pivot but if you can move it in and out, side to side. Its gone, Shouldn't have any play, should only pivot.
Alright thanks man will have a look tomorrow.
Genius....Rad Car......why not have both?
-
26-10-2013 06:12 AM
#4268
***Official What did you do to your EK today***
All good ctx, I know that, but it's not the feel I'm going for in the car, just after a bit more of a neutral setup without going over the top.
If it was a b series, maybe different story, but I think 13mm rsb is more than enough for a d16
Just hoping it clears the exhaust piping!
Last edited by Alvis; 26-10-2013 at 06:24 AM.
-
26-10-2013 07:07 AM
#4269
Hondapartsdirect.com Still ship to Australia so you wont need a shipping forwarding service.
-
26-10-2013 08:08 AM
#4270
Originally Posted by grifty
Hondapartsdirect.com Still ship to Australia so you wont need a shipping forwarding service.
Ahh, thanks for that mate - looks like they have all the same parts at the same prices too. Good to know
-
31-10-2013 05:06 PM
#4271
Picked up EK4 26mm Front sway bar and EM1 16mm Rear sway bar with kind of dead endlinks and d brackets for $40 f**k yeah!
Last edited by mattsrea; 31-10-2013 at 05:34 PM.
Genius....Rad Car......why not have both?
-
31-10-2013 07:06 PM
#4272
f7 lca mmmmm
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks