DC2 fuse box wont close

[vtecing]

Hey my fuse box under the steering wheel wont stay closed. This also happened in my old dc2r, so im thinking it might be a common thing? any one know how to fix it? Looks like the metal clips might need to be readjusted or something.

[SiReal]

get some tape and tape it up.

I havea dc2r, cover sits nice and flush, but because my car isn't worth a million bucks, i'd just get some clear tape and go from there. No point spending money on a cover which you'll pretty much never open.

[Samm928]

i wanna fix this too. anyone wanna write up a diy thread?

[m3ntAL_l2]

common issue.. no fix?

[Alexplicit]

In the same boat

[waix]

same problem here thought I was the only one...

[Bulbasaur]

this is a very common issue and can be easily resolved by pushing it back in

[Zilli]

its the clips inside, there are two of them, one on the left and another on the right... off the top of my head i dont remember how i fixed it, but i bent a tab up and it allowed it to sit in its place a lot better... sorry this is vague... but go and have a fiddle, they are flat steel mounting clips

[Bludger]

Did I just say that to myself?

who said that to me?

at least say from the mod team it it was.......

faceless n00b

[jorziie]

i have the same issue in my dc2r! the clip seems to be worn or widen, just softly bend the hook/clip together and it should be fine.. maybe atlease for some time

[vtecing]

i tried this already to no avail

[6thgear]

...unless you have wiring or something preventing the lid from being closed...the clips should be able to be tweaked somehow to get the lid back on. use a small flathead screwdriver to help you bend the clip a little so it would hold better

otherwise go to a local wreckers or hardware shop to see if they have better condition clips that you can replace yours with