engine movement

**AYSHUNBOY** · 17-07-2010 11:54 AM

hey guys mite sound abit wierd..got a problem with my teggy, sometimes i put it into drive and bound to take off some times the engine is heaps loose.. it shakes.. sometimes even when i release smoothly has anyone had the same problem. . ive checked all my mounts and that.. there all in tact. im thinking of getting a torque damper kit.. do they make a difference.. cheers

**Lowiez** · 17-07-2010 12:06 PM

Rubber bushings in your mounts are probably wearing out, not so easy to spot in a glance. I would recommend getting new engine mounts over a torque damper kit though, they do the same job but better

**mnc** · 17-07-2010 05:03 PM

torque damper only works if your mounts are in good condition. otherwise the torque damper will take to much stress and have been known to break.

**DLO01** · 17-07-2010 05:09 PM

Are you sure your mounts are fine? I doubt the damper kit will fix your problem, if anything would just be a band-aid fix.

**AYSHUNBOY** · 17-07-2010 08:14 PM

thanks guys .. i was looking at hasport mounts, are they any good..

**DLO01** · 17-07-2010 08:19 PM

Been covered plenty of times before, please search:
http://www.ozhonda.com/forum/showthr...unts-vibration

Hasports mounts are great, good quality and do the job fine. They will however create more in cabin vibration. You do have other options apart from Hasport mounts. See thread above.

**AYSHUNBOY** · 18-07-2010 02:58 AM

cheers man .. cause a ive heard ov them but never actually took notice.. so engine mounts make a big difference aye

**AYSHUNBOY** · 18-07-2010 02:59 AM

:d.....

**AYSHUNBOY** · 18-07-2010 03:01 AM

when i get the hasport mounts would be stop my wheel hops most of the time.. cause man that gives me the shits sometimes haha.. and also these silka fix.. they any good.. or should i go straight to new mounts.. cheers