Stud patter and offset of Jazz

[Fizz]

can anyone tell me the formula on how to calculate overall wheel diameter?

[golfphunk]

what tyres would suit 15x6.5?

i'm taking a guess 205/50? or 205/45?

[Jus-10]

15x6.5 = 195/50

16x7 = 195/45

17x7 = 205/40

[cumi_cumi]

how about 18"x8 with offset 35? will it fit well?

[petrovski]

how about 18"x8 with offset 35? will it fit well?

NO. Ive got 18x7's on my car and they scrub a little.

With that offset and that width you will be scrubbing a lot.

Pete

[Fizz]

tried getting a set of 16" last weekend, but the rims wouldn't fit. at first the guy tried 16x6.5(+40) and it scraped the inner edges of front calipers. then we tried 16x7(+38) and it was sticking out by a mile! any recommendations guys?

im thinking of trying 16x7(+40) and hope this time it fits perfectly.

[Zimp13]

tried getting a set of 16" last weekend, but the rims wouldn't fit. at first the guy tried 16x6.5(+40) and it scraped the inner edges of front calipers. then we tried 16x7(+38) and it was sticking out by a mile! any recommendations guys?

im thinking of trying 16x7(+40) and hope this time it fits perfectly.

+40 is the right offset... its normal to scrap the front caliper cos for vtec jazz the brake hub is smaller than the i-dsi one (unless for some rims design wont scrap)... just put a spacer... that will solve the problem....

[Fizz]

so 16x6.5(+40) with a spacer would do the trick? how wide should the spacer be then?

[Zimp13]

so 16x6.5(+40) with a spacer would do the trick? how wide should the spacer be then?

5mm more than enuf.... this doesnt happen on ur car only but for most jazzes outside...

[Jus-10]

I run 16x7 with +42 offset and it fits perfectly

[STTICH]

jus.. wth ur p1s before..wat offset were those?

[Jus-10]

mmm I think they were +35...pretty crazy offset but they filled the guards well...

Looked awesome on the car...if only I could have driven it!!!