..........
Last edited by tiksie; 08-06-2011 at 08:21 AM.
JDM D15B - you wouldn't understand No K-SWAP ? No worries - Unfriend
great DIY just wondering about the cutting part. Are you just using a standard applicator pad? back and forth motion?
I personally used a woolf buffing pad with a orbital buffer, but to save costs, you can do this by hand with as you said, a standard applicator pad. It would be best to do it in circular motions to get more area.
great write up mate, just wondering where did u get those sandpapers? bunnings doesn't seem to stock those grits you mentioned
you can get all those products from supercheap
I got them from VG Auto Paints. Google it! (In Sydney) I suggest getting all of it from VG Auto Paints (if you are close to it ofcourse) as they focus on paints.
Last edited by tiksie; 14-08-2010 at 04:13 PM.
nice write up, will definitely give it a go when i get my rideeeeeeee!!
Here is a front lip I did for a member on JDMST aswell: Before: Sanded back with 380 wet/dry sandpaper: Primered with a few coats: Then hit it with some colour: Using the same steps as above. Lip installed:
Last edited by tiksie; 17-08-2010 at 03:03 AM.
And here is my old EG's roof that I did: Before: Process: End: ALL USING THE SAME PROCESS AS ABOVE.
.......
Last edited by tiksie; 08-06-2011 at 08:22 AM.
Damn man sucks you're too busy woulda gotten you to do my respray!
Samm928: I must say your the biggest noob kid ever. that is all. WTFPWNED Secretly trying to make my daily into a warrior without my missus knowing...
wow....awesome. Reckon its possible to do it with pearl paint? I have a white eg and wanted to do it pearl but was told I would have to bake it? but I was hoping to do a diy cos it'd be heaps cheaper...
Forum Rules
Bookmarks