Page 3 of 4 FirstFirst 1234 LastLast
Results 25 to 36 of 45
  1. #25
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    take it back and get them to adjust the exhaust

    did u just get the muffler put on - or is it a full catback system?

    im getting S12 + 2.25" catback + 2 hotdogs + hi-flow cat - put on today

    im hoping the hotdogs will keep it nice and low sound without and fart or rasp - my mechanic will adjust the setup if it sounds shit tho =)
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  2. #26
    i have 2.5" piping, headers, hi flow cat 2 resonators

  3. #27
    Newcomer Array
    Join Date
    Sep 2010
    Car:
    93 CRX DEL SOL
    I got my one done i got the oval shaped one fitted on my crx del sol .... sounds clean ...not very loud ..but deep especially when vteck kicks... it does stick out abit...and i have scraped it a lil..but its stainless steel so doesnt really do damage

  4. #28
    Member Array
    Join Date
    Sep 2008
    Location
    Ghettoland
    Car:
    Isabel
    Im running an xforce S12, no resonator, 2inch catback and mines EXTREMELY quiet until u hit some high rpms then its a nice deep tone hehe
    Samm928: I must say your the biggest noob kid ever.
    that is all.

    WTFPWNED
    Secretly trying to make my daily into a warrior without my missus knowing...

  5. #29
    feck...then wtf is up with mine....are u guys both running the xforce tip

  6. #30
    Member Array
    Join Date
    Sep 2008
    Location
    Ghettoland
    Car:
    Isabel
    im running a different tip but the tip doesnt really change much lols
    Samm928: I must say your the biggest noob kid ever.
    that is all.

    WTFPWNED
    Secretly trying to make my daily into a warrior without my missus knowing...

  7. #31
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    just got a call from my mechanic and hes having some issues fitting my s12 on

    if you dont have a swaybar than it will be easy - but i put a 14mm swaybar on my EG Sedan so hes having issues with clearances etc

    hes gona put it on a slight angle - and hes only using one resonator - so hopefully it will turn out ok =)
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  8. #32
    Member Array
    Join Date
    Nov 2008
    Car:
    03 CL9, 93 EG4
    hmm so im guessing youll have a bit more of a problem fitting it with a 22mm swaybar
    im thinking of getting one as well.. pabs got a sound clip of yours? ive seen most on youtube but still undecided
    got gay k?

  9. #33
    my 14 mm didnt get in the way at all when he put it on the angle...i think my farty noise is due to my 2.5" piping all the way through...oh well, anyone want a twin loop exhaust..im selling mine

  10. #34
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    get a resonator put in ... will make a big difference
    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  11. #35
    Quote Originally Posted by TheSaint View Post
    get a resonator put in ... will make a big difference
    i have 2 already a 12" and a 20"

  12. #36
    Member Array
    Join Date
    Dec 2009
    Location
    Perth
    Car:
    09 City Vti-L
    Quote Originally Posted by infurNOS View Post
    my 14 mm didnt get in the way at all when he put it on the angle...i think my farty noise is due to my 2.5" piping all the way through...oh well, anyone want a twin loop exhaust..im selling mine
    if anything i would have thought a larger pipe would make it deeper. i got 2.25 catback, and its basically silent at idle. but barks on WOT. cruising is just a nice hum.
    ---------------------------------------------------------
    Just can't get enough of these engine conversions.
    First a mini, now a civic.... Whats next??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.