issue solved ! : how to bypass the handbrake safety for video

[zco]

WARNING:

OFFROAD USE ONLY!!

IT IS ILLEGAL AND DANGEROUS FOR THE DRIVER TO VIEW VIDEO WHILE DRIVING, THIS IS INTENDED FOR SHOW USE AND OFFROAD USE ONLY.


Hi guys, I am having issues bypassing the handbrake safety system on a new headunit i purchased for my unregistered vehicle (because many of us on here have unregistered vehicles, show cars and race cars that we want to do this on..... )

It is a singledin pioneer 8200/8250/BT model with 3" screen
the green wire that comes out of the pioneer harness is supposed to go to the handbrake. i have grounded that wire with the black wire that comes out of the pioneer harness.

It still does not work.. a friend mentioned that some new units these days need a double tap on grounding before it works..

Anyone have any ideas ?

[2MPRS]

from what ive heard u either ground that wire directly to metal or connect it to 12v power like the cigarette lighter. ive also heard u might need to put the earth on a switch as some newer headunits require the earth to be activated after the hu is on

[slimx]

new units need a BYPASS KIT. check ebay

[zco]

i did some more research.. newer head units need the handbrake wire to be grounded after the head unit turns on !

it seems like the bypass kits are some sort of relay's with a few wires.. i cbf making up a relay system, so might have to just buy one in haha.

thanks for the help guys ! +1 to both of you's

[zco]

here is an example of a bypass kit
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT

i just bought it because i cbf going to buy a relay and making one up
but if you are keen on making one, then here is a link that may help you out

http://www.youtube.com/watch?v=g8HCcNy9QQQ

[Stig]

just ground the handbrake wire, well it worked for my iva-w502ev

i have a video bypass unit if you are interested

[na-118]

lOL just buy pass the handbrake wire to a switch so you can turn it on and off if you have a clarion dvd unit ill show you how to by pass it without handbrake wire connected

[zco]

i dont want the hassles of a switch. and also ugly interior lol bought hte bypass kit already fella's

stig: i already grounded the cable, but if u read, the newer headunits need the ground to be connected AFTER the headunit is turned on. if its constantly grounded, it will not work...