Results 1 to 4 of 4
  1. #1

    anyone have this on their car?

    hi

    http://www.ebay.com.au/itm/HONDA-ACC...item2a37b4ace7

    is it quick? as in navigating (software? cpu? laggy?)
    what appealing in this unit is that it has reverse camera and gps build in

    my next question is there other option?
    my other thought is taking out the console box just under the stereo and replace it with a lcd screen for gps and reverse camera, if so where should i start looking? as finding a bracket to fit the unit in the console box would be hard to find

  2. #2
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    is it quick? as in navigating (software? cpu? laggy?)
    no worse than any other gps unit out there, just try to get one with a bit of ram and cpu power
    what appealing in this unit is that it has reverse camera and gps build in

    Few people here have it, no myself but ive seen it in action

    my next question is there other option?
    converting to factory nav, but reverse camera wont be supported natively and wiring is hell

    my other thought is taking out the console box just under the stereo and replace it with a lcd screen for gps and reverse camera, if so where should i start looking? as finding a bracket to fit the unit in the console box would be hard to find
    google "accord double din" brackets and some will show up.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  3. #3
    hi thanks for the reply fredoops, so i done abit of research and i found the mounting brackets on ebay

    http://www.ebay.com.au/itm/Honda-Acc...item3a79e4b4a2

    http://www.ebay.com.au/itm/NEW-METRA...item27f95d6c61

    with your expert opinion(as it seem you have seen it all)
    these will fit?any different btw the two? one seem to provide more accessories compare to the other? and also cost as well><" what i want is a close to perfect fit little gap
    any double din screen from jbhifi will fit into this bracket(universal??)?

    thanks brah!!!
    Last edited by 31359799; 02-04-2015 at 07:11 PM.

  4. #4
    Member Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    '96 Prelude VTi-R ATTS
    For fitment, can't really beat the OEM bracket and yes, any 2DIN unit will fit. A screen that low isn't the best position though.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.