aftermarket ek angel eyes

**khoa456** · 12-09-2010 10:33 PM

hi everyone i have just changed my headlights to the aftermarket angel but i have a problem with the low and high beam. as every one knows the ek comes with h4's my new lights are h1 and are two separate lights one for low beam and one for high beam but the thing is that the low beam turns off when i turn high beam on. anyone got any suggestions how i could fix this problem or how to rewire it?

**khoa456** · 13-09-2010 02:20 PM

anyone?

**tylerjames** · 13-09-2010 02:42 PM

saw a white EK coupe with angels yesterday. looked hot.
as for your wiring, I'm not sure bud.

**lsvtec** · 13-09-2010 02:45 PM

its supposed to be like that, my eg has angel lights and when i turn on high beam the low beam turns off.

**khoa456** · 14-09-2010 10:34 AM

oh is it thanks guys appreciate it. i did some research on google and some guy with a gb8 got his lights rewired by an Electrician so i might give that a try and if all fails i guess ill just lice with the low beams turning off

Cheers

**tylerjames** · 24-09-2010 10:15 PM

ordered my set of angels last night.
can't wait to get them on

**Baboy** · 24-09-2010 11:13 PM

Where do u guys order them from?

**tylerjames** · 24-09-2010 11:48 PM

I got mine from ebay. yet to arrive, so still to determine quality.
did quite a bit of looking around before I commited to a seller.
generally theres quite a few styles of lights per model. best thing to look at for things like these are feedback from other buys in the same model, the customer service & returns they offer
If you've got the money, look for the quality. it should stand out from the rest.
if not, get your bargin shorts on and start searching

**mugen_ctr** · 25-09-2010 01:04 AM

off topic slighty, anyone know if there are projector style bi-xenon head lights for ek's? Rather than using two separate lighting/bulbs, using one would seem better, and still retaining the stock housing, yet still have projectors for Hids

**dc292177917** · 25-09-2010 04:21 AM

it depends on the factory setting
if yr H4's low beam will off when high beam is on
then that's a pretty big job to get them work at the same time
if yr H4's filament goes at the same time
then u might need to rewire the live wire of the high beam and the low beam to the decided H1 bulbs
for the ground wire u know wt to do yea?
hope that helps if it does