DC5 Headlight Adjustment

[tth41]

Hey guys, i've got HIDs but they spray everywhere. I've adjusted them downwards but was wondering when you adjust them, does it adjust just the bulb or the whole headlight?

Also the futher you adjust it downwards, will the bottom of the headlight reflect the beam upwards?

[WATAJK]

Well have u got OEM headlights??
Take it to a Auto Elec to adjust.. they will do it properly... if it sprays aswell which it would in OEM Headlights then they'll adjust it again...
OEM Headlights and HIDS don't work in a DC5

JDM OEM Headlights & HID's Pure Sexy cause they work right.
They have a different pattern to our headlights which prevents the spray since they come factory with HID's

[EVLGTR]

Mechanics pfft.....Easily done with a screw driver if you can find the vertical adjuster

[WATAJK]

Mechanics pfft.....Easily done with a screw driver if you can find the vertical adjuster

Do know exactly what the legal height for your headlight is??
Mechanic? I said Auto Elec idiot.
My Auto Elec only charge me $5 to do it... All level and it doesn't blind a single person. (Runnin Crystal Vision)

Some people... i swear

[r3ckless]

Can do this urself... 1 min job

[acurabot]

From the helms manual:





I've done it myself and it saves me time and money tbh.

[tth41]

yeah ive done all the adjusting guys, the only problem is that there is no defined beam cutoff, it still sprays everywhere. The lower i adjust the beam, the higher it seems to be reflecting?

[EVLGTR]

Do know exactly what the legal height for your headlight is??
Mechanic? I said Auto Elec idiot.
My Auto Elec only charge me $5 to do it... All level and it doesn't blind a single person. (Runnin Crystal Vision)

Some people... i swear

Mechanics/Auto elec...both of them can do it and yes check your states legal requirement for its height

Its a simple job and I didnt know you were offended, i wasnt even talking you retard.....

LMAO Guess what?, i can do it for $0.00...All level and it doesn't blind a single person.

[WATAJK]

Mechanics/Auto elec...both of them can do it and yes check your states legal requirement for its height

Its a simple job and I didnt know you were offended, i wasnt even talking you retard.....

LMAO Guess what?, i can do it for $0.00...All level and it doesn't blind a single person.

Congratulations.
Are you now going to go on and prove how a SRI doesn't get affected by heatsoak? LOL.

yeah ive done all the adjusting guys, the only problem is that there is no defined beam cutoff, it still sprays everywhere. The lower i adjust the beam, the higher it seems to be reflecting?

That ain't your fault buddy, thats what we got with our AUDM Headlights... AUDM reflectors in a DC5 are terrible... they just spray everywhere and there really isnt much you can do.

[Lukey]

get rid of your ricey hids and put stock bulbs back in.


problem solved

[WATAJK]

get rid of your ricey hids and put stock bulbs back in.


problem solved

+1 & get JDM Headlights and u wont have this problem.

[burak213]

hey OP

dont listen to watajk

since you adjusted it a bit lower it shouldn't blind on coming traffic

you might have a slight problem if the other car is coming up a hill other than that you're good to go