Im getting very close to putting my turbo on my civic soon so i thought i would post it up here for you all to see/comment on and help me out.
This is the first time i have turboed a car and and doing it totaly from scratch and mostly by myself. I will be only getting a workshop to finish off the intercooler piping i cant do and the dump pipe and exhaust. And the tuning ovcourse.
My short term aim is for around 150fwkw on the stock engine while i build up a forged engine for much more power.
The parts i have soo far are:
Custom made log manifold by me
Garrett Gt2560 Turbo
AVO Bar and Plate Intercooler 540 x 200 x 76
Intercooler pipes
Blitz Supersound BOV which i have a flange for so i can make it plumb back
450cc DSM Injectors
Custom Braided Oil lines
Custom Water lines
Oil Catch Tank
Innovate LC-1 Wideband O2 Sensor
Dual Core Aluminium Radiator from a EG/EK Civic
Adaptronic Computer
3 Bar MAP Sensor
M&W Dual Pole Ignition Coils
I will be runnig it with 2 coils for a wasted spark set up as is it much easier to implement this rather than keep the original dizzy and CAS, due to the age of the engine it would of been a PITA.
PICS!!
Intercooler mocked up on my parts car
And thers lots more photos here if you want to have a look.
Hope yous like it.
Cheers
Luke
Bookmarks