Ingalls ETD

**Chris_F** · 10-07-2007 11:12 AM

Ingalls is soon to release their engine torque damper for the CL9 and it can be had for around US$150. One of the members on tsx.acurazine has offered to help out the Australians that want to buy one of these (the seller won't ship overseas). So if your interested visit the link below and PM member, Reach

taken from
http://tsx.acurazine.com/forums/show...4&page=4&pp=25

**beeza** · 10-07-2007 11:39 AM

If you couldn't get that one,you can just buy the other off Ebay,it would only be a matter of Fabbing up a couple of brackets to suit your application anyways...

**mugen88** · 10-07-2007 12:09 PM

Originally Posted by beeza

If you couldn't get that one,you can just buy the other off Ebay,it would only be a matter of Fabbing up a couple of brackets to suit your application anyways...

The hard bit is fabricating the bracket so its probabl better to buy this one as we have the same problem with JDM ETD's on AUD euros'.

**beeza** · 10-07-2007 12:12 PM

^^ Ah Gotcha

**Chris_F** · 10-07-2007 12:14 PM

I'm on the verge of buying the FEELS etd because even though the Ingalls will fit it's a bit of an eyesore.

If the Ingalls can be had for around AU$150 though that'd make me reconsider :P

**mugen88** · 10-07-2007 12:22 PM

Originally Posted by Chris_F

I'm on the verge of buying the FEELS etd because even though the Ingalls will fit it's a bit of an eyesore.

If the Ingalls can be had for around AU$150 though that'd make me reconsider :P

U can always install both m8.

**aaronng** · 10-07-2007 01:19 PM

Just PM'd Reach to get one for me. Why an eyesore? Most people want to have a visible ETD in their engine bay.

**Chris_F** · 10-07-2007 01:19 PM

Originally Posted by mugen88

U can always install both m8.

hehe yep you could. I wonder what sort of improvement having two ETD's would make

**Chris_F** · 10-07-2007 01:25 PM

Originally Posted by aaronng

Just PM'd Reach to get one for me. Why an eyesore? Most people want to have a visible ETD in their engine bay.

Yep I sent a PM as well, if he doesn't come through I'll go with the FEELS.

For the same reason I relocated my battery,keeps the engine bay looking neat

**aaronng** · 10-07-2007 01:54 PM

Originally Posted by Chris_F

hehe yep you could. I wonder what sort of improvement having two ETD's would make

With 2 ETDs, you can use softer rubber bushings instead of the hard poly bushings that you would need if you used only 1 ETD.

**aaronng** · 10-07-2007 01:54 PM

Originally Posted by Chris_F

Yep I sent a PM as well, if he doesn't come through I'll go with the FEELS.

For the same reason I relocated my battery,keeps the engine bay looking neat

I see. I thought you relocated your battery for weight balance.