Results 1 to 4 of 4
  1. #1
    Newcomer Array
    Join Date
    Oct 2010
    Car:
    Honda Prelude94

    Lightbulb advice on prelude 94-vtec

    Hey guys came across this site while searching for information on Honda, glad to be a new member

    Was wondering if i could get some advice, after saving up for some time i managed to get my car but i'm still fresh to the technical aspects on cars..

    I need to replace all my rubber seals , they have shrunken and some are coming out. I tried reading up on doing it DIY but i don't have the technical knowledge to do it.

    1) How Much would it cost to get them all changed?
    2) My sun roof is rusted and i was thinking of either replacing(any better suggestions?)
    3) I need to do so minor detailing as well.

    It'll probably cost a bomb if i went to one of those big car centres.. was wondering if anybody has contacts to someone who could get all this done for me.. i've saved up another $1500 for this..hope its enough. I'm in perth, south perth along mill point road... any help would be greatly appreciated.

  2. #2
    what specific rubber seals are u talking about? as in door/window seals?
    there are methods to replacing your sunroof i believe the cheapest being finding a wrecker and getting a 5 gen roof make sure u clean off any rust and relube before you put it back i think.
    I highly suggest you join http://www.preludeaustralia.com/ it has a lot more threads specifically based on preludes.
    Last edited by furorsekka; 29-10-2010 at 08:30 PM.

  3. #3
    Newcomer Array
    Join Date
    Oct 2010
    Car:
    Honda Prelude94
    Hey,

    Thanks for the reply, yep rubber seals for the windows ..front and back and for the doors as well.

    I'm actually an international student , so i'm not too familiar with the wreckers, do i just go down and buy the parts of em? any good wreckers to go too in perth?

    Thanks again

  4. #4
    http://www.honbits.com.au/index.html is one of the wreckers recommended on PA.
    the seals can probably replaced by a mechanic.
    I've been recommended
    Cypher Industries
    1/9 Blamey Place
    O'Connor WA 6163

    T: +61 (08) 9331 8488
    F: +61 (08) 9331 8466
    E: cypherind@westnet.com.au
    hope this helps, anyways if u need other stuff yeah join PA and use the search button there should be quite a few threads relating to your problems

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.