Page 1 of 2 12 LastLast
Results 1 to 12 of 18

Thread: drive shafts

  1. #1
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    2003 euro 6 speed

    drive shafts

    hi guys i seached but couldnt find anything
    is there an issue with the 03 accord

    my car is shaking at all speeds and under full accelation its even worse

  2. #2
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by mr747 View Post
    hi guys i seached but couldnt find anything
    is there an issue with the 03 accord

    my car is shaking at all speeds and under full accelation its even worse
    If you drive your car slowly and turn your steering wheel on full lock in both directions do you get a loud clicking/clunking sound?

  3. #3
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Quote Originally Posted by mr747 View Post
    hi guys i seached but couldnt find anything
    is there an issue with the 03 accord

    my car is shaking at all speeds and under full accelation its even worse
    at speeds of about 100-110kw/hr do you get a wobble/vibration in the steering wheel for the first 5mins or so and then it seems to go away?

  4. #4
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    2003 euro 6 speed
    Quote Originally Posted by tony1234 View Post
    If you drive your car slowly and turn your steering wheel on full lock in both directions do you get a loud clicking/clunking sound?
    no clucking noise
    and it doesnt go away

    if im driving normal its there but you really cant feel it
    as soon as i nail it bang its like the whole steering wheel wants to pop out of my hand

  5. #5
    Newcomer Array
    Join Date
    Aug 2007
    Location
    Gold Coast
    Car:
    04' Accord Euro
    checked your wheel nuts lately?

    They may be loose.

  6. #6
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    2003 euro 6 speed
    nah man there not loose
    i just done a wheel alighment and balance its not that
    the mechnic thinks its the drive shafts just checking if anyone else has experienced this same problem
    its not like driving a euro anymore its like im driving a gemini

  7. #7
    Member Array
    Join Date
    Feb 2004
    Location
    Sydney
    Car:
    2003 Euro Lux
    I had that problem in my old nova, it turned out to be a driveshaft bearing.

  8. #8
    Member Array
    Join Date
    Apr 2006
    Car:
    2006 Euro Std Manual
    There have been several cases in the US TSX forum where other people had similar issues (wheel shaking, tyre rotation and balance did not fix) resolved by replacing the shafts. Yours seems more pronounced than theirs as they only reported it at highway speeds.

    Also in their cases the dealers had no clue and shaft replacement (both sides) was their last resort.

    Good luck.

  9. #9
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    2003 euro 6 speed
    Quote Originally Posted by ok2 View Post
    There have been several cases in the US TSX forum where other people had similar issues (wheel shaking, tyre rotation and balance did not fix) resolved by replacing the shafts. Yours seems more pronounced than theirs as they only reported it at highway speeds.

    Also in their cases the dealers had no clue and shaft replacement (both sides) was their last resort.

    Good luck.
    well i think thats where im heading

    anyone knowany places stocking 03 euro drive shafts???

    i priced themfrom honda 715 per side 1530 total + labour

  10. #10
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by mr747 View Post
    well i think thats where im heading

    anyone knowany places stocking 03 euro drive shafts???

    i priced themfrom honda 715 per side 1530 total + labour
    Try and get some reconditioned shafts.Where the cv joint part has been replaced.

  11. #11
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    2003 euro 6 speed
    im going to thailand in 2 weeks so i will worry about it then

  12. #12
    Newcomer Array
    Join Date
    Apr 2008
    Location
    ACT
    Car:
    CL9 & EK4
    My friends euro did the same thing too,so we when to a driveshaft specialist and they take out both shaft to have a good look,found out the RH shaft bearing was fxxk and he also mention that the car is too low,both driveshaft push in too much,so he machined a few cm in on both shaft and works fine now






    Quote Originally Posted by mr747 View Post
    hi guys i seached but couldnt find anything
    is there an issue with the 03 accord

    my car is shaking at all speeds and under full accelation its even worse

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.