S2000 engined MGA

[mgainaussie]

Much to the disgust of the purists, I have built an MGA with Honda S2000 engine and gearbox..it has a Ford rear end with a LSD. The engine of the S2000 appears to be running a bit rich, with a small amount of smoke after taking off..not a lot to worry about. I don't have much modern engine technology, and was wondering if there is a simple way to lean the engine back? Apart from this, she goes like the clappers, and annoys the hell out of those who think it's an old car!

I am on the Gold Coast, and if there are any tuners out there who can help, please let me know.

[AusS2000]

What ECU are you using? If stock the problem is elsewhere. If aftermarket, let us know what kind?

[ncmx5]

ZOMG, i want to come and have a look. Where abouts in the Gold Coast, PM me!

[mgainaussie]

What ECU are you using? If stock the problem is elsewhere. If aftermarket, let us know what kind?

Standard ECU that only utilises engine functions.

[grifty]

can u please post some pics for us

[ludecrs]

Tried the ye old map whack / ECU disconnect to reset option?

Cheapest alternative: VAFC2 (not recommend)
Cheapest ECU piggyback option: Greddy E Manage ultimate
Best ECU Option: haltech 1000, AEM 1052U V1 or V2.

Getting it tuned on the Gold Coast? Pete @ ProTorque did my S2000 along with a few others in SE QLD. Piece of advice, don't use Matt Spry from PITS.

[drsilliez]

whats an MGA? does it look like this? http://en.wikipedia.org/wiki/MG_MGA

[mgainaussie]

The wikipedia link is exactly that. When I can fathom out how to attach some pics, I will!
Gary

[grifty]

use www.imageshack.us to upload some pics.

[ap1.2]

i had a simular problem check the vacume lines are corectly fitted my car ran a little rich when i did not reconect mine properly mainly the small ones that run inline with the fual rail and conect to the intake pipe also check for other vacume leaks

[VeYzZii]

1991 BMW 318i + F20 = awesome..
Datty 510 + F20 = badass..
MG + F20 = I dont know bro..