air intake pipe

**Geelude** · 26-01-2005 10:24 PM

hey guys,

Can anyone tell me where I can purchase a air intake pipe for the Jazz and how much would it cost? I have tried a couple of performance shops and also autobarn, but no one seems to be able to help me.

Thanks

Tony

**TypeG** · 26-01-2005 10:33 PM

CAI?
get some kitchen exhuast pipe from hardware shop
they will do the job

**petrovski** · 26-01-2005 11:37 PM

you can get the apexi one made for the jazz from www.modyourcar.com

or get one custom made its about the same price.

Pete

**TypeG** · 26-01-2005 11:53 PM

he want CAI pipe or pipe to the pod???

**petrovski** · 27-01-2005 12:05 AM

if you just want the cold air pipe you can get cheap autotechnica (spelling?) stuff from auto one fro about $35 or you can get full on fireproof piping like jus-10 that cost abnout $70.

there is heeps of posts on intakes fro the jazz already. Do a search and im sure you will find what you're looking for

Pete

**muli** · 27-01-2005 06:23 PM

anyone know what size the diameter of the pipe is where the intake pipe goes around the throttle body? also if i get a custom pipe pad for a pod to run it into the corner where the standard box gets it air, i know i gotta hookup that air sensor but what about the other hose, can i just put a little oil breather(little pod looking thing on that)

**petrovski** · 28-01-2005 06:32 AM

muli- 2 1/2' when i measured it. As for the 'other hose' ou can get a little tube welded onto the intake pipe.

Pete

**muli** · 28-01-2005 02:20 PM

what does it really do, my understanding is that if i rev the engine relative happily, oil will come up through this pipe but does it go back into the engine or onto the air filter and would there be any benefit in having something welded onto the intake pipe or just put a little breather on the end of it. but the sensor is required to be connected?

**muli** · 02-02-2005 06:30 PM

Originally Posted by petrovski

muli- 2 1/2' when i measured it. As for the 'other hose' ou can get a little tube welded onto the intake pipe.

Pete

whats your setup look like, any piccies, how much did it cost to get that intake pipe custom made?

**petrovski** · 03-02-2005 12:03 PM

it was about 110 for the apexi pod, 150 for the pipe, 3 for the clamps and 27 for the silicone pipe.

its an S bend that puts the pod right in the corner. I will get another pic up for you when i get a chance (Y)

Pete