Page 1 of 3 123 LastLast
Results 1 to 12 of 25
  1. #1
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9

    Hey all, ANOTHER DA9 owner =)

    Hey guys, thought I should say hi =p
    had a DA9 for a few years till she started to **** up all the time so ended up getting a new car ( that currently sits on my mechanics hoist waiting for a new tranny), so decided I was sick of looking at her getting spider webs all over it and just looking like crap, anyway so was looking around and found a DA9 for $100 off eBay ( was also listed on here) so now I have one good body and tranny with a B18A1 with 255xxx k engine about to come out and be replaced by the newer B18A1 with 160xxx k engine, never done this befor, but I am gunna get through this ( I hope) and I'll end up with my old engine to play around with n try to rebuild down the track maybe.

    So yeah hope to eventually get ma DA back on the road, b great to come to a meet to see all ur beast's =)

    Thanks guys
    Last edited by DA9-47; 14-03-2011 at 03:41 PM. Reason: looks better bigger

  2. #2
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9

    Side shot of good car with Shiiite engine ( i know it needs to be dropped, lol)
    Last edited by DA9-47; 14-03-2011 at 03:34 PM.

  3. #3
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9


    Inside the Grey teg , this needs alot of attention.

  4. #4
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9


    Rear view, converting to a 2 seater, trying to figure out how to make it look neat though and fit a sub/tire ect

    REALLY need to find a good boot floor that doesnt move, or locks in or somthing, any ideas??
    Last edited by DA9-47; 14-03-2011 at 03:43 PM. Reason: addition text added

  5. #5
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9


    Old Engine, (255k) want to extend the intake down through the hole

  6. #6
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9


    Newer Enigne from Parts car, crap is everywhere, Soz =(

  7. #7
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    good luck with it all man,
    def need some lows haha,
    best way to learn is just play round with things and ask questions haha
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  8. #8
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9
    Cheers mate, I know all u worked/mint DA9 owners might look at this and see a dump, but it all starts somewhere , it's more fun if u watch step by step all the diferent shit I do till it actually looks ok lolz, after all it's all about the build, Isnt it ?
    and stevo I think ur right about the metal look in rear, if all excess metal bit in the way are shaved and it got a nice paint job inside, with a cross bar and back lights covered, would still look clean as long as it got a nice spray, will have to check my book to see were the fuel pump is as never replaced it, and make it accessable , gunna see if I can find some pics tonight at work to give me inspiration for inside the rear =)

  9. #9
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    i took a pic when i went racing, of stripped back but idk where it is.
    fuel pump is underneath rear seats, well the top cover is,
    haha im not used to stock height anymore, its cuz the da chassis is so low, they had to go so 4wd spec with the oem ride height.
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  10. #10
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9
    Ohhh dude tell me about it so retarded how high it sits stock, they should have made a 4wd version lol, if u Eva find the pic pm me , love to see it, and so that thing with three screws holding it in with wires coming out is the top of the fuel pump? Might have to make a removable box to go over it or something

  11. #11
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    ya thats it thats the cover and power for it,
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  12. #12
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9
    Sweet cheers dude =)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.