Hi AusAccord,

I have the same double din console as Xanctus, recently there is an issue with my speaker and I need to take out the head unit to check the wire. Unfortunately the pic you posted here had been removed by tinypic. Can you re-post the same pic to help me identify the locations to pry out the front fascia? Appreciate your help.

Thanks,
kcteo

Quote Originally Posted by AusAccord View Post
ok finally the cloud cleared. you have a double din console already (lucky you) with a single din stereo. and now you want to install a flip single din unit at the bottom like my previous setup, correct? easily done with little modification.



the front fascia like a soccer goalie frame highlighted in red is in one piece and just clipped onto the face. if you inspect carefully and you should able to slot something on both sides pointed in yellow then pry it out. really careful on the top bit as its quite thin which may break. once the front fascia out and pretty much you can see then figure out the rest. 2 bolts on each side unscrew the stereo with bottom pocket out. you do not need to take the top cover off as not giving you more access.

let us know if you do not understand what i mentioned above. Happy modding!!