Results 1 to 2 of 2
  1. #1
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]

    Cool [CL9] 2003 Accord Euro OEM head unit removal

    I found it REALLY hard to find a guide to remove the head unit for repairs (or coin removal, don't ask...) online....

    Since the AUDM Euro has different dash compared to the USDM Acura TSX. Then it hit me... AUDM euro uses same dash and unit as the seppo Accord VTi etc.

    So I did another search using the big 'seppo' accord and found this guide, it's 90% what the Euro is.

    http://www.cardomain.com/ride/561772...-accord/page-3

    hope that helps
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  2. #2
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    That guide is not doing it the best way. Following that, the trim around the aircon vents will have damage from the screwdriver. You are supposed to put the screw driver into the vents and at the side, there is a little groove for the screw driver to sit in. Then you can pull that part out without damaging the surrounding plastic.
    --------------------------------------
    Stocky CL9 - 1:17.2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.