Jono's 07 Euro

[jono_l]

they look much better than the stock ones.. but dude auto? c'monn u wana be able to shift!!

Unfortunately I'm not the only one who drives this car, so had no choice!

Was installation easy?

Definitely. Simply remove the old footrest (didn't manage to do so without breaking the clips on mine), and the new one clips right in. Old brake pedal cover simply slips off, and you bolt the new cover on using the supplied allen bolts and nyloc nuts. Hardest part was the accelerator pedal cover - this required drilling through the existing plastic pedal, once you've done that, you just rivet it on using the supplied rivets.

[mrgu]

progress please

[pitiek]

As promised, pic of sports pedals installed:

Hi Jono,

Do you know if I can use the same sport pedal kit for CU2?

[jono_l]

progress please

Wow, been 3/4 of a year since I've posted anything in this thread. Have had the car for over a year now, and have put 18000km on it since I took delivery December 2010 (just hit 80000km last week).

Either way, updates as requested:

Engine:
- Installed CT-E Icebox at 75000km. Bumper off job, but pretty straight forward. Decided I didn't like the extra noise from the airbox lid replacement, so back to an OEM filter and airbox lid for the time being. May swap it back in at some point in the future to give it a second go - we'll see.
- Switched to Mobil 1 0w-40 at the last service, car feels very healthy, especially after valve clearance adjustment. Very happy.
- Auto trans now running Redline D4, after doing a "3x3" trans fluid replacement (i.e. 3x drain and refill 3 quarts), which will leave me with ~80% new fluid. Shifts feel faster compared to stock Honda ATF-Z1, less flaring, but not harsh/uncomfortable either. Highly recommended.

Suspension:
- Have decided that car will remain at stock ride height, as I do not wish to sink too much more money into it. Was close to biting the bullet on a Bilstein & Eibach setup, but simply could not justify it.
- Installed eBay front strut tower brace. Good bang for your buck at $50 delivered, swear it improves turn-in and the front end generally feels tighter, but also seems to contribute to slightly increased steering kickback. Generally happy.
- Installed Ultra Racing lower subframe brace (front). Also helped make front end feel tighter, don't think it had as much of a pronounced effect as the strut tower brace though. Still happy at $90 delivered.
- Installed Progress rear sway bar on soft setting. Best thing I've spent on the car bar none. Car turns in great, not a huge difference in ride comfort, but generally makes for a much more entertaining drive. Soft setting was a sweet spot for me - car feels neutral.

Exterior:
- Installed Osram 66240CBI 5000K D2S bulbs. Loving the whiter colour and increased brightness, unlike eBay 5000K bulbs which give you a brighter colour at the expense of brightness. Bloody expensive though! Got a spare set of these (never used), PM if interested.
- Both bumpers need a respray. Front end had an unfortunate run-in with a pole at a carpark, slight scrape. Rear end copped a few scratches when parked outside work one day - bastards never left a note. If anybody knows a good panel shops that they can recommend in Ryde area, please let me know!
- Installed Sport/Euro R grille. Looks so much better than the "old man" chrome grille on the stock Euro lux.

Sound:
- Installed Boston S50 2-way splits in front doors (tweeter mounted on wing mirror sail panels), and Boston S953 on rear parcel shelf. Still running off stock head unit - these ones are just about efficient enough to run unamped. Happy with sound quality.

Unfortunately, it doesn't look like I'll be spending much more money on this car - started a job a few months ago where I'm entitled to a subsidised company lease vehicle, and have been very tempted by the prospect of essentially halving my running costs. Don't even get to drive it too much these days - my current commute is a little over 15km per day, and most weeknights I borrow a work vehicle instead!

Still, not quite ready to let the CL9 go yet - but am essentially looking at just enjoying it as is without wasting any more money on mods, or at least stick to stuff that I can easily part out when the time comes to sell it. Will still get those bloody bumpers fixed up though so at least I can look at it when I'm not driving it! :P

Anybody want any pictures of anything, give me a shout and I'll be happy to oblige.

Hi Jono,

Do you know if I can use the same sport pedal kit for CU2?

Not too sure my friend, get the feeling that they may be different parts. Off the top of my head, RRP for CU2 pedal kit wasn't too ridiculous? May be worth giving a dealer a call.

[mrgu]

pics please..pm if willing part out..insterested in pedals and door sills

[pitiek]

I will do that...
I also still saving for a progress RSB..
Are you using the stock endlinks or did you get an aftermarket one?

[Xplodin]

Suspension:
- Have decided that car will remain at stock ride height, as I do not wish to sink too much more money into it. Was close to biting the bullet on a Bilstein & Eibach setup, but simply could not justify it.

Bilstein Eibach for the win! I Friken love this set up and i would never go to anything else...

I know you don't commute to work anymore and neither do i... i love my car and never gonna part with it.

With the Osram CBI one do u have pics and does it really make that much difference from Stock Osrams?

And pics of ur car of course please!

[Fredoops]

Engine:
- Installed CT-E Icebox at 75000km. Bumper off job, but pretty straight forward. Decided I didn't like the extra noise from the airbox lid replacement, so back to an OEM filter and airbox lid for the time being. May swap it back in at some point in the future to give it a second go - we'll see.
- Switched to Mobil 1 0w-40 at the last service, car feels very healthy, especially after valve clearance adjustment. Very happy.
- Auto trans now running Redline D4, after doing a "3x3" trans fluid replacement (i.e. 3x drain and refill 3 quarts), which will leave me with ~80% new fluid. Shifts feel faster compared to stock Honda ATF-Z1, less flaring, but not harsh/uncomfortable either. Highly recommended.

I cant even bloody hear mine, at all.

Problem is not the lid, it's the seal of the box (or the lack of it).

You probably had the bad batch of icebox like I did. I had I use a Stanley knife and shave the plastic resins around the bolt hole to get the li to stay down.

On top of that I had to pull out the metal rings inside the bolt hole.

[jono_l]

pics please..pm if willing part out..insterested in pedals and door sills

Am going to try get some updated pics when it dries out up here in Sydney! Will let you know when (or if!) I do come around to selling the car :P

I will do that...
I also still saving for a progress RSB..
Are you using the stock endlinks or did you get an aftermarket one?

Stock endlinks my friend. Only had the swaybar in for around 3000km but no problems so far. Would rather snap and replace stock endlinks than install huge beefy ones and wind up tearing the chassis mounting points.

Bilstein Eibach for the win! I Friken love this set up and i would never go to anything else...

I know you don't commute to work anymore and neither do i... i love my car and never gonna part with it.

With the Osram CBI one do u have pics and does it really make that much difference from Stock Osrams?

And pics of ur car of course please!

Wish I could justify a new suspension setup, but there is no rational or financial reason for me to keep the car, so the least I can do is limit the amount of mods I put into it! :P I keep telling myself the day I can get a company car that matches the driving enjoyment of the Euro I will get rid of it...

Osram CBI is noticeably whiter and brighter. I had some pictures from before with stock 4300K Osram one one side and CBI on the other which I'll try dig out for you.

I cant even bloody hear mine, at all.

Problem is not the lid, it's the seal of the box (or the lack of it).

Wasn't a problem with airbox sealing, as the lid fit and sealed well even with the metal rings outside the bolt hole.

The noise was caused by the fact that the lid appears to have a resonant frequency which corresponds to an engine speed of approx 2000-2500rpm. This then created a notable resonance-type booming noise at those engine speeds when under load (i.e. >1/2 throttle), which was eliminated by reinstalling the stock lid, even though I'd ripped out the stock resonator and replaced it with the icebox velocity stack. Some people are happy to live with that, but I'm a picky sort of person when it comes to sound.

[I CU2]

Hi Jono,

Do you know if I can use the same sport pedal kit for CU2?

I have the CU2 Sports Pedal Kit.

[pitiek]

I have the CU2 Sports Pedal Kit.

Like installed on your car or for sale?

[I CU2]

Like installed on your car or for sale?

Oh, Installed on my car! Here's my thread I posted about them when I was thinking about installing them: http://www.ozhonda.com/forum/showthr...-Sports-Pedals

(Sorry for the O.T, O.P)