Page 1 of 4 1234 LastLast
Results 1 to 12 of 47
  1. #1

    XFORCE Exhuast systems and headers for Honda Civic EG, EK & EJ Review

    Xforce exhaust systems are designed to be a true bolt-on option and power gainer. All exhaust systems are R&D in-house and dyno tested with proven power gains. 304 Stainless steel mandrel bends, and flanges are used in the construction for its strength, excellent heat resistant,, rust proof, high flow (mandrel bends) and finish properties. Everything in the Xforce range includes bolts, nuts, gaskets and everything else needed for a true bolt on experience.

    Xforce recommends a dyno tune after an exhaust item has been upgraded (like any other power mod) to fully utilize its power potential.


    Cat-Back System for EG, EK & EJ

    Model: EG & EK Hatch Back and Sedan
    Designs:
    1)Cannon Rear Muffler: 60mm pipe diameter; Maximum Power; Racing Sound
    2)Twin Loop Rear Muffler: 60mm pipe diameter; Maximum Power; Lower Sound output than Cannon muffler; No obvious exhaust noise from cabin on low and mid rpm; Quicker throttle response.









    Header (EG/EK D15/D16)
    Model: EG-EK B16 engine
    Designs:
    1) 4-2-1: 38mm-42mm-60mm;increase mid- range power, improved drivability
    2) 4-1: 42mm-63mm;Maximize top end power output.





    Video: Twin loop sound clip

    Automotive social media http://motorculture.com.au or call us on 02 9418 9008

    For some daily car culture check out http://zengarage.com.au

  2. #2
    Newcomer Array
    Join Date
    Apr 2009
    Location
    New-Caledonia
    Car:
    Honda civic EK4
    Hi,

    Will the twin loop system fit the OEM header of an EK4 (diamete: 50 mm)?

    Thanks

  3. #3
    Hi Sam .

    twin loop cat back system should fit oem cat.
    Automotive social media http://motorculture.com.au or call us on 02 9418 9008

    For some daily car culture check out http://zengarage.com.au

  4. #4
    Newcomer Array
    Join Date
    Apr 2009
    Location
    New-Caledonia
    Car:
    Honda civic EK4
    Can you confirm that the inlet is 50 mm of the cat back system (I got an OEM header and I will use a 5zigen decat that is also 50mm)?

    How much for the system shipping to New Caledonia?

  5. #5
    the xforce twin loop cat back to suit an EK is 60mm with a 3.5" tip. it is design to suit the standard honda oem cat. as long as the your decat is design to suit a oem system everything should bolt up. however xforce can not guarantee its system will fit other brands.

    best bet would be to also purchase a high flow xforce cat to suit. For delivery cost please contact xforce directly

    email: inquiry@xforce.com.au
    Tel: 02 9793 7338
    Automotive social media http://motorculture.com.au or call us on 02 9418 9008

    For some daily car culture check out http://zengarage.com.au

  6. #6
    Newcomer Array
    Join Date
    Apr 2009
    Location
    New-Caledonia
    Car:
    Honda civic EK4
    Ok thanks I'll hit them up!

  7. #7
    Newcomer Array
    Join Date
    Mar 2011
    Location
    Adelaide
    Car:
    Honda B18C EG
    hi mate, how much can you do a header for b18c2 on eg?

    cheers

  8. #8
    Newcomer Array
    Join Date
    Aug 2011
    Location
    NSW
    Car:
    Civic em1
    hey how much for 421 headers and catback for em1 b16

  9. #9
    both have pm
    Automotive social media http://motorculture.com.au or call us on 02 9418 9008

    For some daily car culture check out http://zengarage.com.au

  10. #10
    Member Array
    Join Date
    Jan 2007
    Location
    Melb
    Car:
    CL9
    Can u get dc5 header? If so, what's the prices on the 4-1 and the 4-2-1? and are they in stock?
    HCCM#23

    02 DC5 ITR

  11. #11
    only 4-2-1


    RRP 650 .
    Last edited by matespace; 07-10-2011 at 02:01 PM.
    Automotive social media http://motorculture.com.au or call us on 02 9418 9008

    For some daily car culture check out http://zengarage.com.au

  12. #12
    Newcomer Array
    Join Date
    Jan 2012
    Location
    Sydney
    Car:
    eg b18
    Did you told a price? I'm looking for the same thing

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.