Mate i think what your asking is Open-ended and there are simply too many factors. You need to sit down and set some goals. Then go speak to a engine builder & EFI tuner and ask the questions about the best way to obtain your goals.
Every brand & manufacture has its pro's & cons in terms of different power applications and any build is not specific about any one part its the combination of parts that is most important.
But in general ... Yes Cp are "good" and no better or worse then any other brand IMO.
Light up with Lyle - Electrical / Communications / Instrumentation
2011 W.A Super Sprint Champion Road Reg U2L Thanks to my freinds/sponsors Success Legal Lawyers for helping me do enough rounds to win and Zack at Cypher Industries for top class dyno tuning.
Endyn Rollerwaves are best from my reading / observing.. CP are 'pretty' good.. Do some research on them, work out what silicon content means, what your purpose is. Just cause a piston is forged doesn't mean its good. Sometimes a cast piston is best value for money. Find out the PTW clearances and understand them...
Endyn Rollerwaves are best from my reading / observing.. CP are 'pretty' good.. Do some research on them, work out what silicon content means, what your purpose is. Just cause a piston is forged doesn't mean its good. Sometimes a cast piston is best value for money. Find out the PTW clearances and understand them...
isnt rollerwave just a process where they remove sharp edges on piston surface?
just use what your builder and tuner is comfortable with and recomends, i have CP's in my RB26 and its going to see 30psi soon so i wouldnt say they are shit
WOULD YOU LIKE SOME FRONT BAR WITH YOUR FRONT MOUNT
Bookmarks