Page 1 of 2 12 LastLast
Results 1 to 12 of 13
  1. #1
    Member Array
    Join Date
    Nov 2009
    Location
    Melbourne
    Car:
    Civic EJ8

    Strongest double sided tape?

    Hey ppl, need advice on this one, ive tried most of the commercially available ones, they just dont hold at all, im tryna use it on a lip, but none just seem to work, an im wasting my time and money lol

    im all ears ppl
    I <3 BOOST! D16+T SOHC

  2. #2
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    INTEGRA TYPE R
    3M tapes are the best IMO ibe ever em before for a couple diff applications and worked well fOr me
    Goodluck
    THERES NO CAR LIKE A TYPE R

  3. #3
    3M is the brand people use when adding diy lips in the U.S forums ive seen. anything by 3M is pretty good anyways

  4. #4
    Member Array
    Join Date
    Nov 2009
    Location
    Melbourne
    Car:
    Civic EJ8
    cheers guys, 3m sounds like the only brand ppl use, is there a specific type of 3m double sided tape? ive tried 3m stuff before, but was only really meant for indoor, not automotive stuff, not as strong as id hope lol
    I <3 BOOST! D16+T SOHC

  5. #5
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    The tape's adhesion also really depends on the surface prep. Make sure you do a wipe down of the surfaces with a suitable solvent.

    If you want to apply the lip, 3M does an automotive trim tape. If you can't find that, you can always go to Bunnings and get the 3M Exterior Mounting tape. Similar stuff but the exterior mounting tape is 1" wide whereas the automotive trim tape is 1 cm wide.
    --------------------------------------
    Stocky CL9 - 1:17.2

  6. #6
    Member Array
    Join Date
    Jul 2009
    Location
    Melbourne West
    Car:
    Yellow EG =D
    make sure u use a heat gun to bring the temps to a proper level so the tape works at its best.
    WINTON PB - 1:48.9
    EG5 1.6L SOHC

  7. #7
    Member Array
    Join Date
    Nov 2009
    Location
    Melbourne
    Car:
    Civic EJ8
    Oh didnt realize there was methods on applying it on LOL, id always just stick it on and hope for the best, im definite gonna give those tips a shot! cheers guys
    I <3 BOOST! D16+T SOHC

  8. #8
    Member Array
    Join Date
    Jul 2009
    Location
    Melbourne West
    Car:
    Yellow EG =D
    Make sure u get the 3m tape in the red box. Clean the surface real good and don't be stingy using the tape.
    WINTON PB - 1:48.9
    EG5 1.6L SOHC

  9. #9
    Member Array
    Join Date
    Jun 2006
    Location
    WA
    Car:
    EG+CL9
    3M red tape is probably the best stuff u can get

    use some Isocol to clean the surface (rubbing alcohol) - u can get it from most chemists

    ----------------------------
    D15b Turbo EG Sedan Build + CL9 Lux N/A Build
    http://www.ozhonda.com/forum/showthread.php?t=127680

  10. #10
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    This is the proper stuff:


    Tough to find unless you work in the industry.

    Instead, you can use this:
    --------------------------------------
    Stocky CL9 - 1:17.2

  11. #11
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    I tried and failed with tape bro, so just used two screws lol.

    Have also used sikaflex before, but wouldn't recommend this unless you know you're never taking it off. Need to remove with paint thinner.

  12. #12
    Member Array
    Join Date
    Jan 2009
    Location
    NSFW
    Car:
    Go Kart
    Are you using tape for better fitment or for security?...

    cause ill tell you now, it will still get stolen lol
    ლ(ಠ益ಠლ) Y U DO DIS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.