Page 20 of 35 FirstFirst ... 101718192021222330 ... LastLast
Results 229 to 240 of 412
  1. #229
    Member Array
    Join Date
    Jun 2005
    Car:
    Accord Euro Lux
    True, I'll grab some tomorrow.
    How much is needed? 12L?

    Is it around $70/4L @ honda?

  2. #230
    http://autorepairservice.wordpress.c...at-low-speeds/ so this guy recommends full flush and no drain and fill?

  3. #231
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by 08r3308 View Post
    http://autorepairservice.wordpress.c...at-low-speeds/ so this guy recommends full flush and no drain and fill?
    Yea at up to 30000 miles, which is almost 50000km

    If you change every 15-20k km then you'd be changing almost just as much fluid as a full 3x3 at 50000km

    What he was against was the dealer doing a 1x1 every 40-50k km.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  4. #232
    So in that case if i do 1 x every 10,000 k i should be fine

    Maybe i should get another 6l and do 3x3 anyhow

  5. #233
    Quote Originally Posted by Cla View Post
    True, I'll grab some tomorrow.
    How much is needed? 12L?

    Is it around $70/4L @ honda?
    thats what ive heard too. 12L should do the trick with a 3x3 flush (3 litres x 3 times)

  6. #234
    is anyone using http://productsforyou.castrol.com.au...ultivehicle/35

    would this be better than valvoline max life

  7. #235
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by 08r3308 View Post
    is anyone using http://productsforyou.castrol.com.au...ultivehicle/35

    would this be better than valvoline max life
    Doubt it, it doesn't say its honda ATF compliant.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  8. #236
    Member Array
    Join Date
    Jun 2012
    Location
    Perth
    Car:
    CD5 & GE6
    Just go with the fluid mention here in this thread
    I know it's a good idea to ask about other fluids
    But Fredoops has made a list suitable for our transmissions
    There shouldn't really be a need to doubt that
    You've gone through more accords than I changed underwear this month! - Sugz

    www.OzAccord.net/forum

  9. #237
    Quote Originally Posted by Jasemas View Post
    Just go with the fluid mention here in this thread
    I know it's a good idea to ask about other fluids
    But Fredoops has made a list suitable for our transmissions
    There shouldn't really be a need to doubt that
    Not doubting , he has done a great job on this thread

    i did a search on different fluids and castrol recommend their fluid in their search for Accord Euro where Valvoline don't.

    I did sent email to castrol to see what they would say about this but will see , in meantime i might give Valvoline a go

  10. #238
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by 08r3308 View Post

    i did a search on different fluids and castrol recommend their fluid in their search for Accord Euro where Valvoline don't.
    yes it is :-) EDIT: for CL9...

    Last edited by Fredoops; 07-01-2014 at 09:07 PM.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  11. #239
    Quote Originally Posted by Fredoops View Post
    yes it is :-)

    not for cu2


  12. #240
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    well... you're in luck...

    Redline has a new ATF come out

    D6

    It's Dw1 compatible.

    http://www.redlineoil.com/product.aspx?pid=115&pcid=7

    seems that Dw1 is just a thinner ATF cause D6 is thinner than the ole D4.... Might be safer for you to look at DW1 compatible fluids
    Last edited by Fredoops; 07-01-2014 at 08:31 PM.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.