K-Swap Issues

[91KTD]

Hey guys i am contemplating buying a k24a1 out of a 04 Crv to put into my crx. I was just wondering should is the crv wireing loom usable or do i need to get a custom loom done. Any help would be great as i have never attempted a kswap before and only had experience with b and d series engines.

thanks

[cotties]

it will require extensive wiring mods but the crv loom could be used with modification
pm me if you start and you need help

[Snoop_gee]

91KTD....check your PM.
i will send u something.

[chargeR]

Most of the swap harnesses, along with all the OEM ECUs suitable, are designed to work with the 02-05 DC5 harness, so it might just be easier to pick up one of those. If you want a K24 and don't want to open it (pistons, rods etc.) get an A3 from a CL9 Euro, they are a much better motor stock than the one in the CR-V.

[91KTD]

cheers charger. i've decided to wait till my dc5r halfcut arrives from japan before i decide what im going to do about the bottom end

[fatboyz39]

If you want hassle free, get a dc5r wiring loom